VARIoT IoT vulnerabilities database

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device. Cisco IOS XE SD-WAN The software contains an authentication vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be put into a state. Both Cisco IOS and IOS XE are products of Cisco (Cisco). CLI is one of those command line interfaces. SD-WAN Software is one of the software-defined WAN software

Huawei products NIP6800;Secospace USG6600;USG9500 have a memory leak vulnerability. An attacker with high privileges exploits this vulnerability by continuously performing specific operations. Successful exploitation of this vulnerability can cause service abnormal. NIP6800 , Secospace USG6600 , USG9500 Is vulnerable to a lack of resource release after a valid lifetime.Service operation interruption (DoS) It may be put into a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

There are multiple out of bounds (OOB) read vulnerabilities in the implementation of the Common Open Policy Service (COPS) protocol of some Huawei products. The specific decoding function may occur out-of-bounds read when processes an incoming data packet. Successful exploit of these vulnerabilities may disrupt service on the affected device. (Vulnerability ID: HWPSIRT-2018-12275,HWPSIRT-2018-12276,HWPSIRT-2018-12277,HWPSIRT-2018-12278,HWPSIRT-2018-12279,HWPSIRT-2018-12280 and HWPSIRT-2018-12289) The seven vulnerabilities have been assigned seven Common Vulnerabilities and Exposures (CVE) IDs: CVE-2020-1818, CVE-2020-1819, CVE-2020-1820, CVE-2020-1821, CVE-2020-1822, CVE-2020-1823 and CVE-2020-1824. IPS Module firmware, NGFW Module firmware, NIP6300 firmware etc. Huawei The product contains an out-of-bounds read vulnerability.Service operation interruption (DoS) It may be in a state

An issue was discovered in Sysax Multi Server 6.90. An attacker can determine the username (under which the web server is running) by triggering an invalid path permission error. This bypasses the fakepath protection mechanism. Codeorigin Sysax Multi Server is an FTP (File Transfer Protocol) server and Shell server for Windows system of American Codeorigin company. The vulnerability stems from network systems or products failing to properly filter special elements in resources or file paths. An attacker could use the vulnerability to access a location outside the restricted directory

regcomp.c in Perl before 5.30.3 allows a buffer overflow via a crafted regular expression because of recursive S_study_chunk calls. A security vulnerability exists in the regcomp.c file in versions prior to Perl 5.30.3. 7.7) - ppc64, ppc64le, s390x, x86_64 3. Summary: Red Hat Advanced Cluster Management for Kubernetes 2.0.8 General Availability release, which fixes bugs and security issues. Red Hat Advanced Cluster Management for Kubernetes provides the capabilities to address common challenges that administrators and site reliability engineers face as they work across a range of public and private cloud environments. Clusters and applications are all visible and managed from a single console—with security policy built in. Bug fix: * RHACM 2.0.8 images (BZ #1915461) 3. Solution: Before applying this update, make sure all previously released errata relevant to your system have been applied. Bugs fixed (https://bugzilla.redhat.com/): 1915461 - RHACM 2.0.8 images 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 5. 8.2) - aarch64, noarch, ppc64le, s390x, x86_64 3. Description: Security Fix(es): * Addressed a security issue which can allow a malicious playbook author to elevate to the awx user from outside the isolated environment: CVE-2021-20253 * Upgraded to a more recent version of autobahn to address CVE-2020-35678. * Upgraded to a more recent version of nginx to address CVE-2019-20372. Bug Fix(es): * Fixed a bug which can intermittently cause access to encrypted Tower settings to fail, resulting in failed job launches. * Improved analytics collection to collect the playbook status for all hosts in a playbook run 3. Solution: For information on upgrading Ansible Tower, reference the Ansible Tower Upgrade and Migration Guide: https://docs.ansible.com/ansible-tower/latest/html/upgrade-migration-guide/ index.html 4. Bugs fixed (https://bugzilla.redhat.com/): 1790277 - CVE-2019-20372 nginx: HTTP request smuggling in configurations with URL redirect used as error_page 1911314 - CVE-2020-35678 python-autobahn: allows redirect header injection 1928847 - CVE-2021-20253 ansible-tower: Privilege escalation via job isolation escape 5. It includes built-in features to help in building a more successful API program, including access control, rate limits, payment gateway integration, and developer experience tools. Bugs fixed (https://bugzilla.redhat.com/): 1804533 - CVE-2020-9283 golang.org/x/crypto: Processing of crafted ssh-ed25519 public keys allows for panic 1853652 - CVE-2020-14040 golang.org/x/text: possibility to trigger an infinite loop in encoding/unicode could lead to crash 5. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 ===================================================================== Red Hat Security Advisory Synopsis: Moderate: perl security update Advisory ID: RHSA-2021:1266-01 Product: Red Hat Enterprise Linux Advisory URL: https://access.redhat.com/errata/RHSA-2021:1266 Issue date: 2021-04-20 CVE Names: CVE-2020-10543 CVE-2020-10878 CVE-2020-12723 ===================================================================== 1. Summary: An update for perl is now available for Red Hat Enterprise Linux 7.4 Advanced Update Support, Red Hat Enterprise Linux 7.4 Telco Extended Update Support, and Red Hat Enterprise Linux 7.4 Update Services for SAP Solutions. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. 2. Relevant releases/architectures: Red Hat Enterprise Linux Server AUS (v. 7.4) - noarch, x86_64 Red Hat Enterprise Linux Server E4S (v. 7.4) - noarch, ppc64le, x86_64 Red Hat Enterprise Linux Server Optional AUS (v. 7.4) - x86_64 Red Hat Enterprise Linux Server Optional E4S (v. 7.4) - ppc64le, x86_64 Red Hat Enterprise Linux Server Optional TUS (v. 7.4) - x86_64 Red Hat Enterprise Linux Server TUS (v. 7.4) - noarch, x86_64 3. Description: Perl is a high-level programming language that is commonly used for system administration utilities and web programming. 4. Solution: For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 5. Package List: Red Hat Enterprise Linux Server AUS (v. 7.4): Source: perl-5.16.3-292.el7_4.2.src.rpm noarch: perl-CPAN-1.9800-292.el7_4.2.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-292.el7_4.2.noarch.rpm perl-ExtUtils-Embed-1.30-292.el7_4.2.noarch.rpm perl-ExtUtils-Install-1.58-292.el7_4.2.noarch.rpm perl-IO-Zlib-1.10-292.el7_4.2.noarch.rpm perl-Locale-Maketext-Simple-0.21-292.el7_4.2.noarch.rpm perl-Module-CoreList-2.76.02-292.el7_4.2.noarch.rpm perl-Module-Loaded-0.08-292.el7_4.2.noarch.rpm perl-Object-Accessor-0.42-292.el7_4.2.noarch.rpm perl-Package-Constants-0.02-292.el7_4.2.noarch.rpm perl-Pod-Escapes-1.04-292.el7_4.2.noarch.rpm x86_64: perl-5.16.3-292.el7_4.2.x86_64.rpm perl-Time-Piece-1.20.1-292.el7_4.2.x86_64.rpm perl-core-5.16.3-292.el7_4.2.x86_64.rpm perl-debuginfo-5.16.3-292.el7_4.2.i686.rpm perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-devel-5.16.3-292.el7_4.2.i686.rpm perl-devel-5.16.3-292.el7_4.2.x86_64.rpm perl-libs-5.16.3-292.el7_4.2.i686.rpm perl-libs-5.16.3-292.el7_4.2.x86_64.rpm perl-macros-5.16.3-292.el7_4.2.x86_64.rpm Red Hat Enterprise Linux Server E4S (v. 7.4): Source: perl-5.16.3-292.el7_4.2.src.rpm noarch: perl-CPAN-1.9800-292.el7_4.2.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-292.el7_4.2.noarch.rpm perl-ExtUtils-Embed-1.30-292.el7_4.2.noarch.rpm perl-ExtUtils-Install-1.58-292.el7_4.2.noarch.rpm perl-IO-Zlib-1.10-292.el7_4.2.noarch.rpm perl-Locale-Maketext-Simple-0.21-292.el7_4.2.noarch.rpm perl-Module-CoreList-2.76.02-292.el7_4.2.noarch.rpm perl-Module-Loaded-0.08-292.el7_4.2.noarch.rpm perl-Object-Accessor-0.42-292.el7_4.2.noarch.rpm perl-Package-Constants-0.02-292.el7_4.2.noarch.rpm perl-Pod-Escapes-1.04-292.el7_4.2.noarch.rpm ppc64le: perl-5.16.3-292.el7_4.2.ppc64le.rpm perl-Time-Piece-1.20.1-292.el7_4.2.ppc64le.rpm perl-core-5.16.3-292.el7_4.2.ppc64le.rpm perl-debuginfo-5.16.3-292.el7_4.2.ppc64le.rpm perl-devel-5.16.3-292.el7_4.2.ppc64le.rpm perl-libs-5.16.3-292.el7_4.2.ppc64le.rpm perl-macros-5.16.3-292.el7_4.2.ppc64le.rpm x86_64: perl-5.16.3-292.el7_4.2.x86_64.rpm perl-Time-Piece-1.20.1-292.el7_4.2.x86_64.rpm perl-core-5.16.3-292.el7_4.2.x86_64.rpm perl-debuginfo-5.16.3-292.el7_4.2.i686.rpm perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-devel-5.16.3-292.el7_4.2.i686.rpm perl-devel-5.16.3-292.el7_4.2.x86_64.rpm perl-libs-5.16.3-292.el7_4.2.i686.rpm perl-libs-5.16.3-292.el7_4.2.x86_64.rpm perl-macros-5.16.3-292.el7_4.2.x86_64.rpm Red Hat Enterprise Linux Server TUS (v. 7.4): Source: perl-5.16.3-292.el7_4.2.src.rpm noarch: perl-CPAN-1.9800-292.el7_4.2.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-292.el7_4.2.noarch.rpm perl-ExtUtils-Embed-1.30-292.el7_4.2.noarch.rpm perl-ExtUtils-Install-1.58-292.el7_4.2.noarch.rpm perl-IO-Zlib-1.10-292.el7_4.2.noarch.rpm perl-Locale-Maketext-Simple-0.21-292.el7_4.2.noarch.rpm perl-Module-CoreList-2.76.02-292.el7_4.2.noarch.rpm perl-Module-Loaded-0.08-292.el7_4.2.noarch.rpm perl-Object-Accessor-0.42-292.el7_4.2.noarch.rpm perl-Package-Constants-0.02-292.el7_4.2.noarch.rpm perl-Pod-Escapes-1.04-292.el7_4.2.noarch.rpm x86_64: perl-5.16.3-292.el7_4.2.x86_64.rpm perl-Time-Piece-1.20.1-292.el7_4.2.x86_64.rpm perl-core-5.16.3-292.el7_4.2.x86_64.rpm perl-debuginfo-5.16.3-292.el7_4.2.i686.rpm perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-devel-5.16.3-292.el7_4.2.i686.rpm perl-devel-5.16.3-292.el7_4.2.x86_64.rpm perl-libs-5.16.3-292.el7_4.2.i686.rpm perl-libs-5.16.3-292.el7_4.2.x86_64.rpm perl-macros-5.16.3-292.el7_4.2.x86_64.rpm Red Hat Enterprise Linux Server Optional AUS (v. 7.4): x86_64: perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-tests-5.16.3-292.el7_4.2.x86_64.rpm Red Hat Enterprise Linux Server Optional E4S (v. 7.4): ppc64le: perl-debuginfo-5.16.3-292.el7_4.2.ppc64le.rpm perl-tests-5.16.3-292.el7_4.2.ppc64le.rpm x86_64: perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-tests-5.16.3-292.el7_4.2.x86_64.rpm Red Hat Enterprise Linux Server Optional TUS (v. 7.4): x86_64: perl-debuginfo-5.16.3-292.el7_4.2.x86_64.rpm perl-tests-5.16.3-292.el7_4.2.x86_64.rpm These packages are GPG signed by Red Hat for security. Our key and details on how to verify the signature are available from https://access.redhat.com/security/team/key/ 7. References: https://access.redhat.com/security/cve/CVE-2020-10543 https://access.redhat.com/security/cve/CVE-2020-10878 https://access.redhat.com/security/cve/CVE-2020-12723 https://access.redhat.com/security/updates/classification/#moderate 8. Contact: The Red Hat security contact is <secalert@redhat.com>. More contact details at https://access.redhat.com/security/team/contact/ Copyright 2021 Red Hat, Inc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUBYH7PTtzjgjWX9erEAQg5Rg//XzoyzGoFRn5v3JT/1ZxNTBxZ+2SbVWnf MVMm5qt1Lkk8s/0DQnvJPKQaHc5yISwGIZChNZe4FxaxSfsn7nvH88d38Xpwht8q QsmKGPEyYmb9qvMbCpjFV6+T1ggaMvfikeFTCe49Kx3H/dDMKPXYvZqL9VtjbKKc Bf0G2fJkhCaEFeFksHZShu2tofoVaHeN/RkwoQrK2HWqb8emlEY5aTtdx3znzSwV Vg3l3sGJ4eDKLz8sWvUJtkkljM/uTM0klbbseyl6duBdFzzSegnn6dMcWLsntADr PgmyL5WMI7lLfJoBwK0m7D45HfCaVMVMp9dQdr5RE+IO+DXUQf9plEhKCIuPBiii aMugog1BamqQUHSYBwyhUOGjyT51SJHg+uVbvYzrQRM8v9YFDgYyliCiqJQmlik7 kq6Jmytn3AkrGQWCJy5TALvNnM59TDTM9IiBNHZ2iA3g59U2a6KZvYFgyT6JZ7rJ FEdgxtMdCLGXIS/aAeq9kiU+Jg4a3RN8gPhGiE39WACtvQ8QWs3GrYDVxlSF6eXg rzXOA6UYyTICfhT4JKb54bkH1MzR7hRaMX0UqnAF4gsPgduEmMdwSpB+5e1q/XIr tRH/FrGPdB/aTo19Pk6u3SQxgpYXQf+SpFiSpxvwsVaSNKGgm3eh3soNuXCCKfpf qTMMs3KSLLM= =1/yn -----END PGP SIGNATURE----- -- RHSA-announce mailing list RHSA-announce@redhat.com https://listman.redhat.com/mailman/listinfo/rhsa-announce . ========================================================================== Ubuntu Security Notice USN-4602-1 October 26, 2020 perl vulnerabilities ========================================================================== A security issue affects these releases of Ubuntu and its derivatives: - Ubuntu 20.04 LTS - Ubuntu 18.04 LTS - Ubuntu 16.04 LTS Summary: Several security issues were fixed in Perl. Software Description: - perl: Practical Extraction and Report Language Details: ManhND discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-10543) Hugo van der Sanden and Slaven Rezic discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-10878) Sergey Aleynikov discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-12723) Update instructions: The problem can be corrected by updating your system to the following package versions: Ubuntu 20.04 LTS: perl 5.30.0-9ubuntu0.2 Ubuntu 18.04 LTS: perl 5.26.1-6ubuntu0.5 Ubuntu 16.04 LTS: perl 5.22.1-9ubuntu0.9 In general, a standard system update will make all the necessary changes

Perl before 5.30.3 has an integer overflow related to mishandling of a "PL_regkind[OP(n)] == NOTHING" situation. A crafted regular expression could lead to malformed bytecode with a possibility of instruction injection. An input validation error vulnerability exists in Perl versions prior to 5.30.3. The vulnerability is caused by the program's incorrect handling of the \"PL_regkind[OP(n)] == NOTHING\" case. Red Hat Advanced Cluster Management for Kubernetes provides the capabilities to address common challenges that administrators and site reliability engineers face as they work across a range of public and private cloud environments. Clusters and applications are all visible and managed from a single console—with security policy built in. Bug fix: * RHACM 2.0.8 images (BZ #1915461) 3. Solution: Before applying this update, make sure all previously released errata relevant to your system have been applied. Bugs fixed (https://bugzilla.redhat.com/): 1915461 - RHACM 2.0.8 images 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 5. Description: Red Hat OpenShift Container Platform is Red Hat's cloud computing Kubernetes application platform solution designed for on-premise or private cloud deployments. For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. This advisory contains the container images for Red Hat OpenShift Container Platform 4.7.13. See the following advisory for the RPM packages for this release: https://access.redhat.com/errata/RHSA-2021:2122 Space precludes documenting all of the container images in this advisory. See the following Release Notes documentation, which will be updated shortly for this release, for details about these changes: https://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel ease-notes.html This update fixes the following bug among others: * Previously, resources for the ClusterOperator were being created early in the update process, which led to update failures when the ClusterOperator had no status condition while Operators were updating. This bug fix changes the timing of when these resources are created. As a result, updates can take place without errors. (BZ#1959238) Security Fix(es): * gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation (CVE-2021-3121) You may download the oc tool and use it to inspect release image metadata as follows: (For x86_64 architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-x86_64 The image digest is sha256:783a2c963f35ccab38e82e6a8c7fa954c3a4551e07d2f43c06098828dd986ed4 (For s390x architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-s390x The image digest is sha256:4cf44e68413acad063203e1ee8982fd01d8b9c1f8643a5b31cd7ff341b3199cd (For ppc64le architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-ppc64le The image digest is sha256:d47ce972f87f14f1f3c5d50428d2255d1256dae3f45c938ace88547478643e36 All OpenShift Container Platform 4.7 users are advised to upgrade to these updated packages and images when they are available in the appropriate release channel. To check for available updates, use the OpenShift Console or the CLI oc command. Instructions for upgrading a cluster are available at https://docs.openshift.com/container-platform/4.7/updating/updating-cluster - -between-minor.html#understanding-upgrade-channels_updating-cluster-between - -minor 3. Solution: For OpenShift Container Platform 4.7 see the following documentation, which will be updated shortly for this release, for important instructions on how to upgrade your cluster and fully apply this asynchronous errata update: https://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel ease-notes.html Details on how to access this content are available at https://docs.openshift.com/container-platform/4.7/updating/updating-cluster - -cli.html 4. Bugs fixed (https://bugzilla.redhat.com/): 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 1923268 - [Assisted-4.7] [Staging] Using two both spelling "canceled" "cancelled" 1947216 - [AWS] Missing iam:ListAttachedRolePolicies permission in permissions.go 1953963 - Enable/Disable host operations returns cluster resource with incomplete hosts list 1957749 - ovn-kubernetes pod should have CPU and memory requests set but not limits 1959238 - CVO creating cloud-controller-manager too early causing upgrade failures 1960103 - SR-IOV obliviously reboot the node 1961941 - Local Storage Operator using LocalVolume CR fails to create PV's when backend storage failure is simulated 1962302 - packageserver clusteroperator does not set reason or message for Available condition 1962312 - Deployment considered unhealthy despite being available and at latest generation 1962435 - Public DNS records were not deleted when destroying a cluster which is using byo private hosted zone 1963115 - Test verify /run filesystem contents failing 5. JIRA issues fixed (https://issues.jboss.org/): LOG-1328 - Port fix to 5.0.z for BZ-1945168 6. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gentoo Linux Security Advisory GLSA 202006-03 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - https://security.gentoo.org/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Severity: Normal Title: Perl: Multiple vulnerabilities Date: June 12, 2020 Bugs: #723792 ID: 202006-03 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Synopsis ======== Multiple vulnerabilities have been found in Perl, the worst of which could result in a Denial of Service condition. Affected packages ================= ------------------------------------------------------------------- Package / Vulnerable / Unaffected ------------------------------------------------------------------- 1 dev-lang/perl < 5.30.3 >= 5.30.3 Description =========== Multiple vulnerabilities have been discovered in Perl. Please review the CVE identifiers referenced below for details. Impact ====== Please review the referenced CVE identifiers for details. Workaround ========== There is no known workaround at this time. Resolution ========== All Perl users should upgrade to the latest version: # emerge --sync # emerge --ask --oneshot --verbose ">=dev-lang/perl-5.30.3" References ========== [ 1 ] CVE-2020-10543 https://nvd.nist.gov/vuln/detail/CVE-2020-10543 [ 2 ] CVE-2020-10878 https://nvd.nist.gov/vuln/detail/CVE-2020-10878 [ 3 ] CVE-2020-12723 https://nvd.nist.gov/vuln/detail/CVE-2020-12723 Availability ============ This GLSA and any updates to it are available for viewing at the Gentoo Security Website: https://security.gentoo.org/glsa/202006-03 Concerns? ========= Security is a primary focus of Gentoo Linux and ensuring the confidentiality and security of our users' machines is of utmost importance to us. Any security concerns should be addressed to security@gentoo.org or alternatively, you may file a bug at https://bugs.gentoo.org. License ======= Copyright 2020 Gentoo Foundation, Inc; referenced text belongs to its owner(s). The contents of this document are licensed under the Creative Commons - Attribution / Share Alike license. https://creativecommons.org/licenses/by-sa/2.5 . Description: Security Fix(es): * Addressed a security issue which can allow a malicious playbook author to elevate to the awx user from outside the isolated environment: CVE-2021-20253 * Upgraded to a more recent version of autobahn to address CVE-2020-35678. * Upgraded to a more recent version of nginx to address CVE-2019-20372. Bug Fix(es): * Fixed a bug which can intermittently cause access to encrypted Tower settings to fail, resulting in failed job launches. * Improved analytics collection to collect the playbook status for all hosts in a playbook run 3. Solution: For information on upgrading Ansible Tower, reference the Ansible Tower Upgrade and Migration Guide: https://docs.ansible.com/ansible-tower/latest/html/upgrade-migration-guide/ index.html 4. Bugs fixed (https://bugzilla.redhat.com/): 1790277 - CVE-2019-20372 nginx: HTTP request smuggling in configurations with URL redirect used as error_page 1911314 - CVE-2020-35678 python-autobahn: allows redirect header injection 1928847 - CVE-2021-20253 ansible-tower: Privilege escalation via job isolation escape 5. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 ==================================================================== Red Hat Security Advisory Synopsis: Moderate: perl security update Advisory ID: RHSA-2021:0343-01 Product: Red Hat Enterprise Linux Advisory URL: https://access.redhat.com/errata/RHSA-2021:0343 Issue date: 2021-02-02 CVE Names: CVE-2020-10543 CVE-2020-10878 CVE-2020-12723 ==================================================================== 1. Summary: An update for perl is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. 2. Relevant releases/architectures: Red Hat Enterprise Linux Client (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Client Optional (v. 7) - x86_64 Red Hat Enterprise Linux ComputeNode (v. 7) - noarch, x86_64 Red Hat Enterprise Linux ComputeNode Optional (v. 7) - x86_64 Red Hat Enterprise Linux Server (v. 7) - noarch, ppc64, ppc64le, s390x, x86_64 Red Hat Enterprise Linux Server Optional (v. 7) - ppc64, ppc64le, s390x, x86_64 Red Hat Enterprise Linux Workstation (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Workstation Optional (v. 7) - x86_64 3. Description: Perl is a high-level programming language that is commonly used for system administration utilities and web programming. Security Fix(es): * perl: heap-based buffer overflow in regular expression compiler leads to DoS (CVE-2020-10543) * perl: corruption of intermediate language state of compiled regular expression due to integer overflow leads to DoS (CVE-2020-10878) * perl: corruption of intermediate language state of compiled regular expression due to recursive S_study_chunk() calls leads to DoS (CVE-2020-12723) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. 4. Solution: For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 5. Bugs fixed (https://bugzilla.redhat.com/): 1837975 - CVE-2020-10543 perl: heap-based buffer overflow in regular expression compiler leads to DoS 1837988 - CVE-2020-10878 perl: corruption of intermediate language state of compiled regular expression due to integer overflow leads to DoS 1838000 - CVE-2020-12723 perl: corruption of intermediate language state of compiled regular expression due to recursive S_study_chunk() calls leads to DoS 6. Package List: Red Hat Enterprise Linux Client (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Client Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux ComputeNode (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux ComputeNode Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Server (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm ppc64: perl-5.16.3-299.el7_9.ppc64.rpm perl-Time-Piece-1.20.1-299.el7_9.ppc64.rpm perl-core-5.16.3-299.el7_9.ppc64.rpm perl-debuginfo-5.16.3-299.el7_9.ppc.rpm perl-debuginfo-5.16.3-299.el7_9.ppc64.rpm perl-devel-5.16.3-299.el7_9.ppc.rpm perl-devel-5.16.3-299.el7_9.ppc64.rpm perl-libs-5.16.3-299.el7_9.ppc.rpm perl-libs-5.16.3-299.el7_9.ppc64.rpm perl-macros-5.16.3-299.el7_9.ppc64.rpm ppc64le: perl-5.16.3-299.el7_9.ppc64le.rpm perl-Time-Piece-1.20.1-299.el7_9.ppc64le.rpm perl-core-5.16.3-299.el7_9.ppc64le.rpm perl-debuginfo-5.16.3-299.el7_9.ppc64le.rpm perl-devel-5.16.3-299.el7_9.ppc64le.rpm perl-libs-5.16.3-299.el7_9.ppc64le.rpm perl-macros-5.16.3-299.el7_9.ppc64le.rpm s390x: perl-5.16.3-299.el7_9.s390x.rpm perl-Time-Piece-1.20.1-299.el7_9.s390x.rpm perl-core-5.16.3-299.el7_9.s390x.rpm perl-debuginfo-5.16.3-299.el7_9.s390.rpm perl-debuginfo-5.16.3-299.el7_9.s390x.rpm perl-devel-5.16.3-299.el7_9.s390.rpm perl-devel-5.16.3-299.el7_9.s390x.rpm perl-libs-5.16.3-299.el7_9.s390.rpm perl-libs-5.16.3-299.el7_9.s390x.rpm perl-macros-5.16.3-299.el7_9.s390x.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Server Optional (v. 7): ppc64: perl-debuginfo-5.16.3-299.el7_9.ppc64.rpm perl-tests-5.16.3-299.el7_9.ppc64.rpm ppc64le: perl-debuginfo-5.16.3-299.el7_9.ppc64le.rpm perl-tests-5.16.3-299.el7_9.ppc64le.rpm s390x: perl-debuginfo-5.16.3-299.el7_9.s390x.rpm perl-tests-5.16.3-299.el7_9.s390x.rpm x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Workstation (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Workstation Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm These packages are GPG signed by Red Hat for security. Our key and details on how to verify the signature are available from https://access.redhat.com/security/team/key/ 7. References: https://access.redhat.com/security/cve/CVE-2020-10543 https://access.redhat.com/security/cve/CVE-2020-10878 https://access.redhat.com/security/cve/CVE-2020-12723 https://access.redhat.com/security/updates/classification/#moderate 8. Contact: The Red Hat security contact is <secalert@redhat.com>. More contact details at https://access.redhat.com/security/team/contact/ Copyright 2021 Red Hat, Inc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUBYBlBRdzjgjWX9erEAQgfWQ/+Pzq//upZZVPBq5+myRLRJCef7277Y+9k 54oh8wOTwtwEMs9ye5Y1FDmAxVd4fWX3JgAss1KE86Hhm5OoCX/FJ0/RGguMR1l2 qwmWtfGuZjrn1SmjdHlf8B/bC0f20IadUUbY/8clpFiMxe5V1g8s9ZgbHv/MBWnm Awac/6LPc7Eb24OnIuTKLYEcQRxuBG1KdikM1NN1uJU5WHkbhZfKWFMnjKihsPGp 42vnomd0P7RdXNc4FbuNlkm2iw04woJyz1AYPdScswWJqawQSbre6+3wpnHlWs4K RerhKZiJLJsC0XmSpma62I4kYbVlniYPcbrF4Zfo1j1vIIvjmOL26B/3JsUVtwfm AKVuAu8DbNIkdSo2CS2gauLWsykukprPx16X8n8Xlb9Kr9iL/r2/sI/jUGce+50S aoe2Hb40VIX6sHPLiEmWP0ufuoDxJZ2mY9mhqAMGt/xCPrZ/Pst0y4hewJVo2AIf /LG758/KJWYBx2ILfBwA07O829irVDnbw5blT47fS3qiqAzXRTp56xkCCnLQ0BGQ Ip3DFIwNVxznKYOgubXJBGl3xYHI+P/bu8tcCAYMaN4hAHdFrqJbPMNLLGf37L73 N83csDc07k/WsKua5atl3suUuYRWxSq6CnV9KNU4aUaKEmu+de+D2k34vn2+le0S HB63T1smQXA=Oj1P -----END PGP SIGNATURE----- -- RHSA-announce mailing list RHSA-announce@redhat.com https://www.redhat.com/mailman/listinfo/rhsa-announce . ========================================================================== Ubuntu Security Notice USN-4602-1 October 26, 2020 perl vulnerabilities ========================================================================== A security issue affects these releases of Ubuntu and its derivatives: - Ubuntu 20.04 LTS - Ubuntu 18.04 LTS - Ubuntu 16.04 LTS Summary: Several security issues were fixed in Perl. Software Description: - perl: Practical Extraction and Report Language Details: ManhND discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-10543) Hugo van der Sanden and Slaven Rezic discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-10878) Sergey Aleynikov discovered that Perl incorrectly handled certain regular expressions. In environments where untrusted regular expressions are evaluated, a remote attacker could possibly use this issue to cause Perl to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2020-12723) Update instructions: The problem can be corrected by updating your system to the following package versions: Ubuntu 20.04 LTS: perl 5.30.0-9ubuntu0.2 Ubuntu 18.04 LTS: perl 5.26.1-6ubuntu0.5 Ubuntu 16.04 LTS: perl 5.22.1-9ubuntu0.9 In general, a standard system update will make all the necessary changes

Perl before 5.30.3 on 32-bit platforms allows a heap-based buffer overflow because nested regular expression quantifiers have an integer overflow. Perl Is vulnerable to out-of-bounds writes.Information is tampered with and service operation is interrupted (DoS) It may be put into a state. An attacker could exploit this vulnerability to cause a denial of service. Bugs fixed (https://bugzilla.redhat.com/): 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 5. JIRA issues fixed (https://issues.jboss.org/): LOG-1328 - Port fix to 5.0.z for BZ-1945168 6. Description: Red Hat Advanced Cluster Management for Kubernetes 2.2.4 images Red Hat Advanced Cluster Management for Kubernetes provides the capabilities to address common challenges that administrators and site reliability engineers face as they work across a range of public and private cloud environments. Clusters and applications are all visible and managed from a single console—with security policy built in. See the following Release Notes documentation, which will be updated shortly for this release, for additional details about this release: https://access.redhat.com/documentation/en-us/red_hat_advanced_cluster_mana gement_for_kubernetes/2.2/html/release_notes/ Security fixes: * redisgraph-tls: redis: integer overflow when configurable limit for maximum supported bulk input size is too big on 32-bit platforms (CVE-2021-21309) * console-header-container: nodejs-netmask: improper input validation of octal input data (CVE-2021-28092) * console-container: nodejs-is-svg: ReDoS via malicious string (CVE-2021-28918) Bug fixes: * RHACM 2.2.4 images (BZ# 1957254) * Enabling observability for OpenShift Container Storage with RHACM 2.2 on OCP 4.7 (BZ#1950832) * ACM Operator should support using the default route TLS (BZ# 1955270) * The scrolling bar for search filter does not work properly (BZ# 1956852) * Limits on Length of MultiClusterObservability Resource Name (BZ# 1959426) * The proxy setup in install-config.yaml is not worked when IPI installing with RHACM (BZ# 1960181) * Unable to make SSH connection to a Bitbucket server (BZ# 1966513) * Observability Thanos store shard crashing - cannot unmarshall DNS message (BZ# 1967890) 3. Solution: Before applying this update, make sure all previously released errata relevant to your system have been applied. Bugs fixed (https://bugzilla.redhat.com/): 1932634 - CVE-2021-21309 redis: integer overflow when configurable limit for maximum supported bulk input size is too big on 32-bit platforms 1939103 - CVE-2021-28092 nodejs-is-svg: ReDoS via malicious string 1944827 - CVE-2021-28918 nodejs-netmask: improper input validation of octal input data 1950832 - Enabling observability for OpenShift Container Storage with RHACM 2.2 on OCP 4.7 1952150 - [DDF] It would be great to see all the options available for the bucket configuration and which attributes are mandatory 1954506 - [DDF] Table does not contain data about 20 clusters. Now it's difficult to estimate CPU usage with larger clusters 1954535 - Reinstall Submariner - No endpoints found on one cluster 1955270 - ACM Operator should support using the default route TLS 1956852 - The scrolling bar for search filter does not work properly 1957254 - RHACM 2.2.4 images 1959426 - Limits on Length of MultiClusterObservability Resource Name 1960181 - The proxy setup in install-config.yaml is not worked when IPI installing with RHACM. 1963128 - [DDF] Please rename this to "Amazon Elastic Kubernetes Service" 1966513 - Unable to make SSH connection to a Bitbucket server 1967357 - [DDF] When I clicked on this yaml, I get a HTTP 404 error. 1967890 - Observability Thanos store shard crashing - cannot unmarshal DNS message 5. 8.2) - aarch64, noarch, ppc64le, s390x, x86_64 3. Bug Fix(es): * [perl-net-ping] wrong return value on failing DNS name lookup (BZ#1973177) 4. Description: Red Hat OpenShift Container Platform is Red Hat's cloud computing Kubernetes application platform solution designed for on-premise or private cloud deployments. For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. This advisory contains the container images for Red Hat OpenShift Container Platform 4.7.13. See the following advisory for the RPM packages for this release: https://access.redhat.com/errata/RHSA-2021:2122 Space precludes documenting all of the container images in this advisory. See the following Release Notes documentation, which will be updated shortly for this release, for details about these changes: https://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel ease-notes.html This update fixes the following bug among others: * Previously, resources for the ClusterOperator were being created early in the update process, which led to update failures when the ClusterOperator had no status condition while Operators were updating. This bug fix changes the timing of when these resources are created. As a result, updates can take place without errors. (BZ#1959238) Security Fix(es): * gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation (CVE-2021-3121) You may download the oc tool and use it to inspect release image metadata as follows: (For x86_64 architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-x86_64 The image digest is sha256:783a2c963f35ccab38e82e6a8c7fa954c3a4551e07d2f43c06098828dd986ed4 (For s390x architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-s390x The image digest is sha256:4cf44e68413acad063203e1ee8982fd01d8b9c1f8643a5b31cd7ff341b3199cd (For ppc64le architecture) $ oc adm release info quay.io/openshift-release-dev/ocp-release:4.7.13-ppc64le The image digest is sha256:d47ce972f87f14f1f3c5d50428d2255d1256dae3f45c938ace88547478643e36 All OpenShift Container Platform 4.7 users are advised to upgrade to these updated packages and images when they are available in the appropriate release channel. To check for available updates, use the OpenShift Console or the CLI oc command. Instructions for upgrading a cluster are available at https://docs.openshift.com/container-platform/4.7/updating/updating-cluster - -between-minor.html#understanding-upgrade-channels_updating-cluster-between - -minor 3. Solution: For OpenShift Container Platform 4.7 see the following documentation, which will be updated shortly for this release, for important instructions on how to upgrade your cluster and fully apply this asynchronous errata update: https://docs.openshift.com/container-platform/4.7/release_notes/ocp-4-7-rel ease-notes.html Details on how to access this content are available at https://docs.openshift.com/container-platform/4.7/updating/updating-cluster - -cli.html 4. Bugs fixed (https://bugzilla.redhat.com/): 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 1923268 - [Assisted-4.7] [Staging] Using two both spelling "canceled" "cancelled" 1947216 - [AWS] Missing iam:ListAttachedRolePolicies permission in permissions.go 1953963 - Enable/Disable host operations returns cluster resource with incomplete hosts list 1957749 - ovn-kubernetes pod should have CPU and memory requests set but not limits 1959238 - CVO creating cloud-controller-manager too early causing upgrade failures 1960103 - SR-IOV obliviously reboot the node 1961941 - Local Storage Operator using LocalVolume CR fails to create PV's when backend storage failure is simulated 1962302 - packageserver clusteroperator does not set reason or message for Available condition 1962312 - Deployment considered unhealthy despite being available and at latest generation 1962435 - Public DNS records were not deleted when destroying a cluster which is using byo private hosted zone 1963115 - Test verify /run filesystem contents failing 5. Description: Security Fix(es): * Addressed a security issue which can allow a malicious playbook author to elevate to the awx user from outside the isolated environment: CVE-2021-20253 * Upgraded to a more recent version of autobahn to address CVE-2020-35678. * Upgraded to a more recent version of nginx to address CVE-2019-20372. Bug Fix(es): * Fixed a bug which can intermittently cause access to encrypted Tower settings to fail, resulting in failed job launches. * Improved analytics collection to collect the playbook status for all hosts in a playbook run 3. Solution: For information on upgrading Ansible Tower, reference the Ansible Tower Upgrade and Migration Guide: https://docs.ansible.com/ansible-tower/latest/html/upgrade-migration-guide/ index.html 4. Bugs fixed (https://bugzilla.redhat.com/): 1790277 - CVE-2019-20372 nginx: HTTP request smuggling in configurations with URL redirect used as error_page 1911314 - CVE-2020-35678 python-autobahn: allows redirect header injection 1928847 - CVE-2021-20253 ansible-tower: Privilege escalation via job isolation escape 5. 7.4) - noarch, x86_64 3. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 ==================================================================== Red Hat Security Advisory Synopsis: Moderate: perl security update Advisory ID: RHSA-2021:0343-01 Product: Red Hat Enterprise Linux Advisory URL: https://access.redhat.com/errata/RHSA-2021:0343 Issue date: 2021-02-02 CVE Names: CVE-2020-10543 CVE-2020-10878 CVE-2020-12723 ==================================================================== 1. Summary: An update for perl is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. 2. Relevant releases/architectures: Red Hat Enterprise Linux Client (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Client Optional (v. 7) - x86_64 Red Hat Enterprise Linux ComputeNode (v. 7) - noarch, x86_64 Red Hat Enterprise Linux ComputeNode Optional (v. 7) - x86_64 Red Hat Enterprise Linux Server (v. 7) - noarch, ppc64, ppc64le, s390x, x86_64 Red Hat Enterprise Linux Server Optional (v. 7) - ppc64, ppc64le, s390x, x86_64 Red Hat Enterprise Linux Workstation (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Workstation Optional (v. 7) - x86_64 3. Description: Perl is a high-level programming language that is commonly used for system administration utilities and web programming. Security Fix(es): * perl: heap-based buffer overflow in regular expression compiler leads to DoS (CVE-2020-10543) * perl: corruption of intermediate language state of compiled regular expression due to integer overflow leads to DoS (CVE-2020-10878) * perl: corruption of intermediate language state of compiled regular expression due to recursive S_study_chunk() calls leads to DoS (CVE-2020-12723) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. 4. Solution: For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 5. Package List: Red Hat Enterprise Linux Client (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Client Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux ComputeNode (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux ComputeNode Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Server (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm ppc64: perl-5.16.3-299.el7_9.ppc64.rpm perl-Time-Piece-1.20.1-299.el7_9.ppc64.rpm perl-core-5.16.3-299.el7_9.ppc64.rpm perl-debuginfo-5.16.3-299.el7_9.ppc.rpm perl-debuginfo-5.16.3-299.el7_9.ppc64.rpm perl-devel-5.16.3-299.el7_9.ppc.rpm perl-devel-5.16.3-299.el7_9.ppc64.rpm perl-libs-5.16.3-299.el7_9.ppc.rpm perl-libs-5.16.3-299.el7_9.ppc64.rpm perl-macros-5.16.3-299.el7_9.ppc64.rpm ppc64le: perl-5.16.3-299.el7_9.ppc64le.rpm perl-Time-Piece-1.20.1-299.el7_9.ppc64le.rpm perl-core-5.16.3-299.el7_9.ppc64le.rpm perl-debuginfo-5.16.3-299.el7_9.ppc64le.rpm perl-devel-5.16.3-299.el7_9.ppc64le.rpm perl-libs-5.16.3-299.el7_9.ppc64le.rpm perl-macros-5.16.3-299.el7_9.ppc64le.rpm s390x: perl-5.16.3-299.el7_9.s390x.rpm perl-Time-Piece-1.20.1-299.el7_9.s390x.rpm perl-core-5.16.3-299.el7_9.s390x.rpm perl-debuginfo-5.16.3-299.el7_9.s390.rpm perl-debuginfo-5.16.3-299.el7_9.s390x.rpm perl-devel-5.16.3-299.el7_9.s390.rpm perl-devel-5.16.3-299.el7_9.s390x.rpm perl-libs-5.16.3-299.el7_9.s390.rpm perl-libs-5.16.3-299.el7_9.s390x.rpm perl-macros-5.16.3-299.el7_9.s390x.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Server Optional (v. 7): ppc64: perl-debuginfo-5.16.3-299.el7_9.ppc64.rpm perl-tests-5.16.3-299.el7_9.ppc64.rpm ppc64le: perl-debuginfo-5.16.3-299.el7_9.ppc64le.rpm perl-tests-5.16.3-299.el7_9.ppc64le.rpm s390x: perl-debuginfo-5.16.3-299.el7_9.s390x.rpm perl-tests-5.16.3-299.el7_9.s390x.rpm x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Workstation (v. 7): Source: perl-5.16.3-299.el7_9.src.rpm noarch: perl-CPAN-1.9800-299.el7_9.noarch.rpm perl-ExtUtils-CBuilder-0.28.2.6-299.el7_9.noarch.rpm perl-ExtUtils-Embed-1.30-299.el7_9.noarch.rpm perl-ExtUtils-Install-1.58-299.el7_9.noarch.rpm perl-IO-Zlib-1.10-299.el7_9.noarch.rpm perl-Locale-Maketext-Simple-0.21-299.el7_9.noarch.rpm perl-Module-CoreList-2.76.02-299.el7_9.noarch.rpm perl-Module-Loaded-0.08-299.el7_9.noarch.rpm perl-Object-Accessor-0.42-299.el7_9.noarch.rpm perl-Package-Constants-0.02-299.el7_9.noarch.rpm perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm x86_64: perl-5.16.3-299.el7_9.x86_64.rpm perl-Time-Piece-1.20.1-299.el7_9.x86_64.rpm perl-core-5.16.3-299.el7_9.x86_64.rpm perl-debuginfo-5.16.3-299.el7_9.i686.rpm perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-devel-5.16.3-299.el7_9.i686.rpm perl-devel-5.16.3-299.el7_9.x86_64.rpm perl-libs-5.16.3-299.el7_9.i686.rpm perl-libs-5.16.3-299.el7_9.x86_64.rpm perl-macros-5.16.3-299.el7_9.x86_64.rpm Red Hat Enterprise Linux Workstation Optional (v. 7): x86_64: perl-debuginfo-5.16.3-299.el7_9.x86_64.rpm perl-tests-5.16.3-299.el7_9.x86_64.rpm These packages are GPG signed by Red Hat for security. Our key and details on how to verify the signature are available from https://access.redhat.com/security/team/key/ 7. References: https://access.redhat.com/security/cve/CVE-2020-10543 https://access.redhat.com/security/cve/CVE-2020-10878 https://access.redhat.com/security/cve/CVE-2020-12723 https://access.redhat.com/security/updates/classification/#moderate 8. Contact: The Red Hat security contact is <secalert@redhat.com>. More contact details at https://access.redhat.com/security/team/contact/ Copyright 2021 Red Hat, Inc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUBYBlBRdzjgjWX9erEAQgfWQ/+Pzq//upZZVPBq5+myRLRJCef7277Y+9k 54oh8wOTwtwEMs9ye5Y1FDmAxVd4fWX3JgAss1KE86Hhm5OoCX/FJ0/RGguMR1l2 qwmWtfGuZjrn1SmjdHlf8B/bC0f20IadUUbY/8clpFiMxe5V1g8s9ZgbHv/MBWnm Awac/6LPc7Eb24OnIuTKLYEcQRxuBG1KdikM1NN1uJU5WHkbhZfKWFMnjKihsPGp 42vnomd0P7RdXNc4FbuNlkm2iw04woJyz1AYPdScswWJqawQSbre6+3wpnHlWs4K RerhKZiJLJsC0XmSpma62I4kYbVlniYPcbrF4Zfo1j1vIIvjmOL26B/3JsUVtwfm AKVuAu8DbNIkdSo2CS2gauLWsykukprPx16X8n8Xlb9Kr9iL/r2/sI/jUGce+50S aoe2Hb40VIX6sHPLiEmWP0ufuoDxJZ2mY9mhqAMGt/xCPrZ/Pst0y4hewJVo2AIf /LG758/KJWYBx2ILfBwA07O829irVDnbw5blT47fS3qiqAzXRTp56xkCCnLQ0BGQ Ip3DFIwNVxznKYOgubXJBGl3xYHI+P/bu8tcCAYMaN4hAHdFrqJbPMNLLGf37L73 N83csDc07k/WsKua5atl3suUuYRWxSq6CnV9KNU4aUaKEmu+de+D2k34vn2+le0S HB63T1smQXA=Oj1P -----END PGP SIGNATURE----- -- RHSA-announce mailing list RHSA-announce@redhat.com https://www.redhat.com/mailman/listinfo/rhsa-announce

Use of a hard-coded cryptographic key to encrypt security sensitive data in local storage and configuration in FortiClient for Windows prior to 6.4.0 may allow an attacker with access to the local storage or the configuration backup file to decrypt the sensitive data via knowledge of the hard-coded key. Windows for FortiClient Contains a vulnerability in the use of hard-coded credentials.Information may be obtained. Fortinet FortiClient is a mobile terminal security solution developed by Fortinet. The solution provides IPsec and SSL encryption, WAN optimization, endpoint compliance, and two-factor authentication when connected to FortiGate firewall appliances. There is a security vulnerability in Fortinet FortiClient versions earlier than 6.4.0 based on the Windows platform. An attacker could exploit this vulnerability to decrypt sensitive information

Ene.sys in Asus Aura Sync through 1.07.71 does not properly validate input to IOCTL 0x80102044, 0x80102050, and 0x80102054, which allows local users to cause a denial of service (system crash) or gain privileges via IOCTL requests using crafted kernel addresses that trigger memory corruption. Asus Aura Sync Is vulnerable to out-of-bounds writes.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be put into a state. ASUS Aura Sync is a hardware light synchronization plug-in from Taiwan ASUS Corporation. A security vulnerability exists in the Ene.sys file in ASUS Aura Sync 1.07.71 and earlier. The vulnerability stems from the program failing to properly validate input sent to IOCTL 0x80102044, 0x80102050, and 0x80102054

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NEC ESMPRO Manager 6.42. Authentication is not required to exploit this vulnerability. The specific flaw exists within the RMI service. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10007. NEC ESMPRO Manager Contains a vulnerability in the deserialization of unreliable data. Zero Day Initiative To this vulnerability ZDI-CAN-10007 Was numbered.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be put into a state. NEC ESMPRO Manager is a product of NEC Corporation for managing NEC servers. The product supports management and monitoring of server CPU load, memory usage, disk usage, server hard disk protection status and LAN traffic status. The vulnerability stems from the program's failure to correctly verify user data

IP-in-IP protocol specifies IP Encapsulation within IP standard (RFC 2003, STD 1) that decapsulate and route IP-in-IP traffic is vulnerable to spoofing, access-control bypass and other unexpected behavior due to the lack of validation to verify network packets before decapsulation and routing. IP-in-IP encapsulation is a tunneling protocol specified in RFC 2003 that allows for IP packets to be encapsulated inside another IP packets. This is very similar to IPSEC VPNs in tunnel mode, except in the case of IP-in-IP, the traffic is unencrypted. An IP-in-IP device is considered to be vulnerable if it accepts IP-in-IP packets from any source to any destination without explicit configuration between the specified source and destination IP addresses. This unexpected Data Processing Error (CWE-19) by a vulnerable device can be abused to perform reflective DDoS and in certain scenarios used to bypass network access control lists. Because the forwarded network packet may not be inspected or verified by vulnerable devices, there are possibly other unexpected behaviors that can be abused by an attacker on the target device or the target device's network environment. An unauthenticated attacker can route network traffic through a vulnerable device, which may lead to reflective DDoS, information leak and bypass of network access controls. Tunnelling protocols are an essential part of the Internet and form much of the backbone that modern network infrastructure relies on today. One limitation of these protocols is that they do not authenticate and/or encrypt traffic. Though this limitation exists, IPsec can be implemented to help prevent attacks. However, implementation of these protocols have been executed poorly in some areas.CVE-2020-10136 Affected Vendor Statement: Cisco has fixed products affected by this CVE in its default configuration and released a security advisory for it at the time of the original disclosure in 2020. Please refer to VU#636397 and to the security advisory link in the References section. References: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-nxos-ipip-dos-kCT9X4 CVE-2024-7595 Not Affected CVE-2024-7596 Not Affected CVE-2025-23018 Not Affected CVE-2025-23019 Not AffectedCVE-2020-10136 Affected Vendor Statement: Cisco has fixed products affected by this CVE in its default configuration and released a security advisory for it at the time of the original disclosure in 2020. Please refer to VU#636397 and to the security advisory link in the References section. References: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-nxos-ipip-dos-kCT9X4 CVE-2024-7595 Not Affected CVE-2024-7596 Not Affected CVE-2025-23018 Not Affected CVE-2025-23019 Not Affected. Cisco NX-OS Software is a data center-level operating system software used by a set of switches of Cisco. A code issue vulnerability exists in Cisco NX-OS Software due to the program decapsulating and processing the IP in an IP packet destined for a locally configured IP address. A remote attacker can exploit this vulnerability to bypass the access control list or cause a denial of service by means of a specially crafted IP in the IP packet. The following products and versions are affected: Nexus 1000 Virtual Edge for VMware vSphere; Nexus 1000V Switch for Microsoft Hyper-V; Nexus 1000V Switch for VMware vSphere; Nexus 3000 Series Switches; Nexus 5500 Platform Switches; Nexus 5600 Platform Switches; Nexus 6000 Switches ; Nexus 7000 Series Switches; Nexus 9000 Series Switches in standalone NX-OS mode; UCS 6200 Series Fabric Interconnects; UCS 6300 Series Fabric Interconnects

FameView configuration software is a high-performance configuration monitoring software based on Windows operating system, which is developed by Beijing Jiekong Company based on many years of engineering application and service experience. It provides economical and perfect automation solutions. Beijing Jiekong FameView configuration software has a command execution loophole, which can be used by attackers to execute arbitrary commands.

FarLinX X25 Gateway through 2014-09-25 allows command injection via shell metacharacters to sysSaveMonitorData.php, fsx25MonProxy.php, syseditdate.php, iframeupload.php, or sysRestoreX25Cplt.php. FarLinX X25 Gateway To OS A command injection vulnerability exists.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be put into a state. FarSite Communications FarLinX X25 Gateway is a gateway product of FarSite Communications in the UK. The product has a browser interface, online statistical information set, connection log records, active session display, and status change alerts. FarSite Communications FarLinX X25 Gateway 2014-09-25 and previous versions of sysSaveMonitorData.php file, fsx25MonProxy.php file, syseditdate.php file, iframeupload.php file and sysRestoreX25Cplt.php file have operating system command injection vulnerabilities, attackers can use Shell metacharacters use this vulnerability to inject commands

FarLinX X25 Gateway through 2014-09-25 allows attackers to write arbitrary data to fsUI.xyz via fsSaveUIPersistence.php. FarLinX X25 Gateway Is vulnerable to out-of-bounds writes.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be put into a state. FarSite Communications FarLinX X25 Gateway is a gateway product of FarSite Communications in the UK. The product has a browser interface, online statistical information set, connection log records, active session display, and status change alerts