VARIoT IoT vulnerabilities database

A Missing Release of Memory after Effective Lifetime vulnerability in the Public Key Infrastructure daemon (pkid) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause Denial of Service (DoS). In a scenario where Public Key Infrastructure (PKI) is used in combination with Certificate Revocation List (CRL), if the CRL fails to download the memory allocated to store the CRL is not released. Repeated occurrences will eventually consume all available memory and lead to an inoperable state of the affected system causing a DoS. This issue affects Juniper Networks Junos OS: All versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue can be observed by monitoring the memory utilization of the pkid process via: root@jtac-srx1500-r2003> show system processes extensive | match pki 20931 root 20 0 733M 14352K select 0:00 0.00% pkid which increases over time: root@jtac-srx1500-r2003> show system processes extensive | match pki 22587 root 20 0 901M 181M select 0:03 0.00% pkid. Juniper Networks Junos OS is a set of network operating system of Juniper Networks (Juniper Networks) dedicated to the company's hardware equipment. The operating system provides a secure programming interface and Junos SDK. An attacker could exploit this vulnerability to perform a DoS attack on the target system

A CWE-798: Use of Hard-coded Credentials vulnerability exists that could result in information disclosure. If an attacker were to obtain the SSH cryptographic key for the device and take active control of the local operational network connected to the product they could potentially observe and manipulate traffic associated with product configuration. Affected Product: Easergy P5 (All firmware versions prior to V01.401.101). Easergy P5 Is vulnerable to the use of hard-coded credentials.Information is obtained, information is tampered with, and service is disrupted (DoS) It may be put into a state. Schneider Electric Easergy P5 is a protection relay from Schneider Electric in France for demanding medium voltage applications. The Schneider Electric Easergy P5 has a trust management issue vulnerability that exists due to the presence of hardcoded credentials in the application code

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could lead to a buffer overflow causing program crashes and arbitrary code execution when specially crafted packets are sent to the device over the network. Protection functions and tripping function via GOOSE can be impacted. Affected Product: Easergy P5 (All firmware versions prior to V01.401.101). Easergy P5 Contains a classic buffer overflow vulnerability.Information is obtained, information is tampered with, and service is disrupted (DoS) It may be put into a state. Schneider Electric Easergy P5 is a protection relay from Schneider Electric, France, for demanding medium voltage applications. A buffer overflow vulnerability exists in Schneider Electric Easergy P5, which exists due to a boundary error when handling untrusted input. An attacker could exploit this vulnerability to execute arbitrary code on the system

A Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent unauthenticated attacker to cause a crash of jdhcpd and thereby a Denial of Service (DoS). In a scenario where DHCP relay or local server is configured the problem can be triggered if a DHCPv4 packet with specific options is received leading to a corruption of the options read from the packet. This corruption can then lead to jdhcpd crash and restart. This issue affects: Juniper Networks Junos OS 17.4R1 and later versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2, 21.2R3; 21.3 versions prior to 21.3R1-S1, 21.3R2

An Improper Validation of Specified Quantity in Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause an rdp crash and thereby a Denial of Service (DoS). If a BGP update message is received over an established BGP session where a BGP SR-TE policy tunnel attribute is malformed and BGP update tracing flag is enabled, the rpd will core. This issue can happen with any BGP session as long as the previous conditions are met. This issue can not propagate as the crash occurs as soon as the malformed update is received. This issue affects Juniper Networks Junos OS: 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S2, 21.1R3. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1

A resource exhaustion issue was addressed with improved input validation. This issue is fixed in iOS 15.2.1 and iPadOS 15.2.1. Processing a maliciously crafted HomeKit accessory name may cause a denial of service. iOS and iPadOS Exists in a resource exhaustion vulnerability.Service operation interruption (DoS) It may be in a state. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 APPLE-SA-2022-01-12-1 iOS 15.2.1 and iPadOS 15.2.1 iOS 15.2.1 and iPadOS 15.2.1 addresses the following issues. Information about the security content is also available at https://support.apple.com/HT213043. HomeKit Available for: iPhone 6s and later, iPad Pro (all models), iPad Air 2 and later, iPad 5th generation and later, iPad mini 4 and later, and iPod touch (7th generation) Impact: Processing a maliciously crafted HomeKit accessory name may cause a denial of service Description: A resource exhaustion issue was addressed with improved input validation. CVE-2022-22588: Trevor Spiniolas (@TrevorSpiniolas) Installation note: This update is available through iTunes and Software Update on your iOS device, and will not appear in your computer's Software Update application, or in the Apple Downloads site. Make sure you have an Internet connection and have installed the latest version of iTunes from https://www.apple.com/itunes/ iTunes and Software Update on the device will automatically check Apple's update server on its weekly schedule. When an update is detected, it is downloaded and the option to be installed is presented to the user when the iOS device is docked. We recommend applying the update immediately if possible. Selecting Don't Install will present the option the next time you connect your iOS device. The automatic update process may take up to a week depending on the day that iTunes or the device checks for updates. You may manually obtain the update via the Check for Updates button within iTunes, or the Software Update on your device. To check that the iPhone, iPod touch, or iPad has been updated: * Navigate to Settings * Select General * Select About * The version after applying this update will be “15.2.1" Information will also be posted to the Apple Security Updates web site: https://support.apple.com/kb/HT201222 This message is signed with Apple's Product Security PGP key, and details are available at: https://www.apple.com/support/security/pgp/ -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEEePiLW1MrMjw19XzoeC9qKD1prhgFAmHfE9AACgkQeC9qKD1p rhhj/Q/8DR6CzP7GPavXxSxdAA7WPqQqcWDHFChGWftw8sNJlpNSJEgMY1ueUMiv sIbY9z7X0QpC81fJWYqEgE7Y4CDnyfabtOQDgdhK6QcpEl+qNPiWbLnga6+rptFj ZLneWJ4kqneyav4ZAlKu8wTLYr8O/yvwYBfsLXXtE7gixFEdbsLjOr4DEs8UzZhG upo9rNw4UFMcxjItKtqjmOgt2hLlFi6RmCKDUUi0j6BbpPSMqTLVpTrUCakePm+u wUI8sbjvRYMDrL+Q5KsryU1M3x1RmCdXxKtwfOsaEHPhExnmUruItypXRybFwUKy PL2RCwDPKoCk9I5ueJ7zXN80d5zn5cZ2Mgxz8u9hYDqYECxD4P/6uaMhXi4Nt96t q6UNiyNVKGpLL2CAJ6tdzfiqEVnCSkDoi6XykQ0OCq2va0Daouhd0b3TBKFXB8Be XVEDbgvts4klZ2bY7IDdJ/ZcWnywpmgROksRbIC7O17sfyaZA47/5aASpljKkxX+ w1KwP7bJOXZr0V9R3hmR+S59XqRN9yqfo64loJDlmSFEjUv6CLzLa8eYHXizZ1Hd RUB4V8F9qtsGx+fF8vLmrpOA0g6AUvmwcFIcC8AP4XHDG5B8mA/UZoenbibitHE+ zqxj+H8ViEMw0/Tbxac7AqYzNifRfvaSCj4g4vys6H1NBYVSbn0= =OflK -----END PGP SIGNATURE-----

A vulnerability in the logging component of Cisco Adaptive Security Device Manager (ASDM) could allow an authenticated, local attacker to view sensitive information in clear text on an affected system. Cisco ADSM must be deployed in a shared workstation environment for this issue to be exploited. This vulnerability is due to the storage of unencrypted credentials in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system. A successful exploit could allow the attacker to view the credentials of other users of the shared device

Multiple vulnerabilities in the web-based management interface of Cisco Security Manager could allow an unauthenticated, remote attacker to conduct cross-site scripting attacks against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. Cisco Security Manager Exists in a cross-site scripting vulnerability.Information may be obtained and information may be tampered with. Cisco Security Manager (CSM) is a set of enterprise-level management applications from Cisco, which is mainly used to configure firewall, VPN and intrusion prevention security services on Cisco network and security devices. Attackers can use this vulnerability to cause code execution and information leakage

A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. JDPI incorrectly classifies out-of-state asymmetric TCP flows as the dynamic-application INCONCLUSIVE instead of UNKNOWN, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R2-S5, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1

A vulnerability in the information storage architecture of several Cisco IP Phone models could allow an unauthenticated, physical attacker to obtain confidential information from an affected device. This vulnerability is due to unencrypted storage of confidential information on an affected device. An attacker could exploit this vulnerability by physically extracting and accessing one of the flash memory chips. A successful exploit could allow the attacker to obtain confidential information from the device, which could be used for subsequent attacks

Multiple vulnerabilities in the web-based management interface of Cisco Security Manager could allow an unauthenticated, remote attacker to conduct cross-site scripting attacks against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. Cisco Security Manager Exists in a cross-site scripting vulnerability.Information may be obtained and information may be tampered with. Cisco Security Manager (CSM) is a set of enterprise-level management applications from Cisco, which is mainly used to configure firewall, VPN and intrusion prevention security services on Cisco network and security devices

An Improper Validation of Syntactic Correctness of Input vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent unauthenticated attacker sending a malformed DHCP packet to cause a crash of jdhcpd and thereby a Denial of Service (DoS). If option-82 is configured in a DHCP snooping / -security scenario, jdhcpd crashes if a specific malformed DHCP request packet is received. The DHCP functionality is impacted while jdhcpd restarts, and continued exploitation of the vulnerability will lead to the unavailability of the DHCP service and thereby a sustained DoS. This issue affects Juniper Networks Junos OS 13.2 version 13.2R1 and later versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS version 12.3R12 and prior versions

A Generation of Error Message Containing Sensitive Information vulnerability in the CLI of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to elevate these to the level of any other user logged in via J-Web at this time, potential leading to a full compromise of the device. This issue affects Juniper Networks Junos OS: All versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. Juniper Networks Junos OS Contains a vulnerability related to information leakage due to error messages.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer-2 control protocols daemon (l2cpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a memory leak. Continued exploitation can lead to memory exhaustion and thereby a Denial of Service (DoS). This issue occurs when specific LLDP packets are received. The impact of the l2cpd cores is that if any of the stp protocols (rstp, mstp or vstp) is used then stp re-converges and traffic loss will occur during that time. Also if any services depend on LLDP state (like PoE or VoIP device recognition) then these will also be affected. The memory utilization of the L2CPd process can be monitored with the following command: user@host> show system processes extensive | match l2cpd 1234 root 52 0 521M 43412K RUN 1 4:02 34.47% l2cpd This issue affects: Juniper Networks Junos OS 18.4 version 18.4R2-S4 and later versions prior to 18.4R2-S10. 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R2; Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S2-EVO; 21.1 version 21.1R1-EVO and later versions; 21.2 versions prior to 21.2R2-EVO. This issue does not affect: Juniper Networks Junos OS 19.1 version 19.1R1 and later versions

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause a Denial of Service (DoS) by sending specific packets over VXLAN which cause the PFE to reset. This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2; 21.3 versions prior to 21.3R1-S1, 21.3R2. This issue does not affect versions of Junos OS prior to 19.4R1. Juniper Networks Junos OS Exists in an exceptional condition check vulnerability.Service operation interruption (DoS) It may be in a state

Multiple vulnerabilities in the web-based management interface of Cisco Security Manager could allow an unauthenticated, remote attacker to conduct cross-site scripting attacks against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. Cisco Security Manager Exists in a cross-site scripting vulnerability.Information may be obtained and information may be tampered with. Cisco Security Manager (CSM) is a set of enterprise-level management applications from Cisco, which is mainly used to configure firewall, VPN and intrusion prevention security services on Cisco network and security devices

An Improper Input Validation vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent unauthenticated attacker to cause a crash of jdhcpd and thereby a Denial of Service (DoS). If a device is configured as DHCPv6 local server and persistent storage is enabled, jdhcpd will crash when receiving a specific DHCPv6 message. This issue affects: Juniper Networks Junos OS All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R2

An Improper Certificate Validation weakness in the Juniper Networks Junos OS allows an attacker to perform Person-in-the-Middle (PitM) attacks when a system script is fetched from a remote source at a specified HTTPS URL, which may compromise the integrity and confidentiality of the device. The following command can be executed by an administrator via the CLI to refresh a script from a remote location, which is affected from this vulnerability: >request system scripts refresh-from (commit | event | extension-service | op | snmp) file filename url <https-url> This issue affects: Juniper Networks Junos OS All versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R1-S1, 21.1R2. Juniper Networks Junos OS contains a certificate validation vulnerability, a security check vulnerability, and a man-in-the-middle vulnerability.Information may be obtained and information may be tampered with

A Missing Release of Resource after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause a Denial of Service (DoS) by sending specific packets over VXLAN which cause heap memory to leak and on exhaustion the PFE to reset. The heap memory utilization can be monitored with the command: user@host> show chassis fpc This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R2-S6, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. This issue does not affect versions of Junos OS prior to 19.4R1. Juniper Networks Junos OS Contains a vulnerability regarding the lack of resource release after a valid lifetime.Service operation interruption (DoS) It may be in a state

A vulnerability in the NETISR network queue functionality of Juniper Networks Junos OS kernel allows an attacker to cause a Denial of Service (DoS) by sending crafted genuine packets to a device. During an attack, the routing protocol daemon (rpd) CPU may reach 100% utilization, yet FPC CPUs forwarding traffic will operate normally. This attack occurs when the attackers' packets are sent over an IPv4 unicast routing equal-cost multi-path (ECMP) unilist selection. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. An indicator of compromise may be to monitor NETISR drops in the network with the assistance of JTAC. Please contact JTAC for technical support for further guidance. This issue affects: Juniper Networks Junos OS 17.3 version 17.3R3-S9 and later versions prior to 17.3R3-S12; 17.4 version 17.4R3-S3 and later versions prior to 17.4R3-S5; 18.1 version 18.1R3-S11 and later versions prior to 18.1R3-S13; 18.2 version 18.2R3-S6 and later versions; 18.3 version 18.3R3-S4 and later versions prior to 18.3R3-S5; 18.4 version 18.4R3-S5 and later versions prior to 18.4R3-S9; 19.1 version 19.1R3-S3 and later versions prior to 19.1R3-S7. This issue does not affect Juniper Networks Junos OS versions prior to 17.3R3-S9. This issue does not affect Juniper Networks Junos OS Evolved. Juniper Networks Junos OS The kernel contains a resource exhaustion vulnerability.Service operation interruption (DoS) It may be in a state