VARIoT IoT vulnerabilities database

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient user input validation of incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Cisco has not released software updates that address this vulnerability. plural Cisco Small Business Router products contain an out-of-bounds write vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. Cisco Small Business is a switch of Cisco (Cisco) in the United States

Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. Relevant releases/architectures: Red Hat Enterprise Linux BaseOS E4S (v. 8.1) - aarch64, noarch, ppc64le, s390x, x86_64 3. Description: The kernel packages contain the Linux kernel, the core of any Linux operating system. Solution: For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 The system must be rebooted for this update to take effect. Bugs fixed (https://bugzilla.redhat.com/): 2090237 - CVE-2022-21123 hw: cpu: Incomplete cleanup of multi-core shared buffers (aka SBDR) 2090240 - CVE-2022-21125 hw: cpu: Incomplete cleanup of microarchitectural fill buffers (aka SBDS) 2090241 - CVE-2022-21166 hw: cpu: Incomplete cleanup in specific special register write operations (aka DRPW) 2114849 - CVE-2022-2588 kernel: a use-after-free in cls_route filter implementation may lead to privilege escalation 6. Package List: Red Hat Enterprise Linux BaseOS E4S (v. Our key and details on how to verify the signature are available from https://access.redhat.com/security/team/key/ 7. ========================================================================== Ubuntu Security Notice USN-5484-1 June 16, 2022 linux vulnerabilities ========================================================================== A security issue affects these releases of Ubuntu and its derivatives: - Ubuntu 14.04 ESM Summary: Several security issues were fixed in the Linux kernel. A privileged attacker could use this to bypass UEFI Secure Boot restrictions. (CVE-2022-21499) It was discovered that a race condition existed in the network scheduling subsystem of the Linux kernel, leading to a use-after-free vulnerability. A local attacker could use this to cause a denial of service (system crash) or possibly execute arbitrary code. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21123) It was discovered that some Intel processors did not completely perform cleanup actions on microarchitectural fill buffers. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21125) It was discovered that some Intel processors did not properly perform cleanup during specific special register write operations. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21166) Update instructions: The problem can be corrected by updating your system to the following package versions: Ubuntu 14.04 ESM: linux-image-3.13.0-190-generic 3.13.0-190.241 linux-image-3.13.0-190-lowlatency 3.13.0-190.241 linux-image-generic 3.13.0.190.199 linux-image-lowlatency 3.13.0.190.199 linux-image-server 3.13.0.190.199 linux-image-virtual 3.13.0.190.199 Please note that fully mitigating processor vulnerabilities requires corresponding processor microcode/firmware updates. ATTENTION: Due to an unavoidable ABI change the kernel updates have been given a new version number, which requires you to recompile and reinstall all third party kernel modules you might have installed. Unless you manually uninstalled the standard kernel metapackages (e.g. linux-generic, linux-generic-lts-RELEASE, linux-virtual, linux-powerpc), a standard system upgrade will automatically perform this as well. Bugs fixed (https://bugzilla.redhat.com/): 1921650 - CVE-2021-3121 gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation 2024946 - Ingress Canary does not respect router sharding on default IngressController 2104825 - Installer creates unnecessary master_ingress_cluster_policy_controller security group rule 2108214 - Route status isn't always getting cleared with routeSelector updates 2108595 - etcd Dashboard should be removed on guest cluster of hypershift 2109193 - Power VS machine Processor is always defaulted to 0.5 2109887 - [UI] MultiClusterHub details after it's creation starts flickers, disappears and appears back (happened twice) 2110528 - Route status isn't always getting cleared with routeSelector updates 2111345 - should use the same value for AlertRelabelConfig with oc explain 2117424 - Backport: https://github.com/openshift/kubernetes/pull/1295 5. JIRA issues fixed (https://issues.jboss.org/): OCPBUGS-1007 - CVE-2021-3121 telemeter-container: [1924548] telemeter-container: gogo/protobuf: plugin/unmarshal/unmarshal.go lacks certain index validation [openshift-4] OCPBUGS-1070 - Update ODC owners OCPBUGS-1104 - package-server-manager does not migrate packageserver CSV from v0.17.0 to v0.18.3 on OCP 4.8 -> 4.9 upgrade OCPBUGS-1145 - Bug 2085336 - [IPI-Azure] Fail to create the worker node which HyperVGenerations is V2 or V1 and vmNetworkingType is Accelerated OCPBUGS-1233 - [IPI] nodelink controller is not able to reconcile and match nodes and machines with logical interfaces defined by nmstate at baremetalhost creation OCPBUGS-1261 - Backport: https://github.com/openshift/kubernetes/pull/1295 OCPBUGS-393 - Setting disableNetworkDiagnostics: true does not persist when network-operator pod gets re-created OCPBUGS-455 - [vsphere] update install-config description for diskType OCPBUGS-524 - Plugin page error boundary message is not cleared after leaving page OCPBUGS-668 - Prefer local dns does not work expectedly on OCPv4.11 OCPBUGS-744 - [4.11] Spoke BMH stuck ?provisioning? after changing a BIOS attribute via the converged workflow OCPBUGS-746 - [4.11] Supermicro server FirmwareSchema CR does not contain allowable_values, attribute_type and read_only flag OCPBUGS-747 - [4.11] Disconnected IPI OCP cluster install on baremetal fails when hostname of master nodes does not include the text "master 6. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gentoo Linux Security Advisory GLSA 202208-23 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - https://security.gentoo.org/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Severity: High Title: Xen: Multiple Vulnerabilities Date: August 14, 2022 Bugs: #810341, #812485, #816882, #825354, #832039, #835401, #850802 ID: 202208-23 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Synopsis ======= Multiple vulnerabilities have been discovered in Xen, the worst of which could result in remote code execution (guest sandbox escape). Background ========= Xen is a bare-metal hypervisor. Affected packages ================ ------------------------------------------------------------------- Package / Vulnerable / Unaffected ------------------------------------------------------------------- 1 app-emulation/xen < 4.15.3 >= 4.15.3 2 app-emulation/xen-tools < 4.15.3 >= 4.15.3 Description ========== Multiple vulnerabilities have been discovered in Xen. Please review the CVE identifiers referenced below for details. Impact ===== Please review the referenced CVE identifiers for details. Workaround ========= There is no known workaround at this time. Resolution ========= All Xen users should upgrade to the latest version: # emerge --sync # emerge --ask --oneshot --verbose ">=app-emulation/xen-4.15.3" All Xen tools users should upgrade to the latest version: # emerge --sync # emerge --ask --oneshot --verbose ">=app-emulation/xen-tools-4.15.3" References ========= [ 1 ] CVE-2021-28694 https://nvd.nist.gov/vuln/detail/CVE-2021-28694 [ 2 ] CVE-2021-28695 https://nvd.nist.gov/vuln/detail/CVE-2021-28695 [ 3 ] CVE-2021-28696 https://nvd.nist.gov/vuln/detail/CVE-2021-28696 [ 4 ] CVE-2021-28697 https://nvd.nist.gov/vuln/detail/CVE-2021-28697 [ 5 ] CVE-2021-28698 https://nvd.nist.gov/vuln/detail/CVE-2021-28698 [ 6 ] CVE-2021-28699 https://nvd.nist.gov/vuln/detail/CVE-2021-28699 [ 7 ] CVE-2021-28700 https://nvd.nist.gov/vuln/detail/CVE-2021-28700 [ 8 ] CVE-2021-28701 https://nvd.nist.gov/vuln/detail/CVE-2021-28701 [ 9 ] CVE-2021-28702 https://nvd.nist.gov/vuln/detail/CVE-2021-28702 [ 10 ] CVE-2021-28710 https://nvd.nist.gov/vuln/detail/CVE-2021-28710 [ 11 ] CVE-2022-21123 https://nvd.nist.gov/vuln/detail/CVE-2022-21123 [ 12 ] CVE-2022-21125 https://nvd.nist.gov/vuln/detail/CVE-2022-21125 [ 13 ] CVE-2022-21166 https://nvd.nist.gov/vuln/detail/CVE-2022-21166 [ 14 ] CVE-2022-23033 https://nvd.nist.gov/vuln/detail/CVE-2022-23033 [ 15 ] CVE-2022-23034 https://nvd.nist.gov/vuln/detail/CVE-2022-23034 [ 16 ] CVE-2022-23035 https://nvd.nist.gov/vuln/detail/CVE-2022-23035 [ 17 ] CVE-2022-26362 https://nvd.nist.gov/vuln/detail/CVE-2022-26362 [ 18 ] CVE-2022-26363 https://nvd.nist.gov/vuln/detail/CVE-2022-26363 [ 19 ] CVE-2022-26364 https://nvd.nist.gov/vuln/detail/CVE-2022-26364 [ 20 ] XSA-378 [ 21 ] XSA-379 [ 22 ] XSA-380 [ 23 ] XSA-382 [ 24 ] XSA-383 [ 25 ] XSA-384 [ 26 ] XSA-386 [ 27 ] XSA-390 [ 28 ] XSA-401 [ 29 ] XSA-402 [ 30 ] XSA-404 Availability =========== This GLSA and any updates to it are available for viewing at the Gentoo Security Website: https://security.gentoo.org/glsa/202208-23 Concerns? ======== Security is a primary focus of Gentoo Linux and ensuring the confidentiality and security of our users' machines is of utmost importance to us. Any security concerns should be addressed to security@gentoo.org or alternatively, you may file a bug at https://bugs.gentoo.org. License ====== Copyright 2022 Gentoo Foundation, Inc; referenced text belongs to its owner(s). The contents of this document are licensed under the Creative Commons - Attribution / Share Alike license. https://creativecommons.org/licenses/by-sa/2.5 . -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 ==================================================================== Red Hat Security Advisory Synopsis: Important: OpenShift Container Platform 4.8.53 bug fix and security update Advisory ID: RHSA-2022:7874-01 Product: Red Hat OpenShift Enterprise Advisory URL: https://access.redhat.com/errata/RHSA-2022:7874 Issue date: 2022-11-18 CVE Names: CVE-2021-45485 CVE-2021-45486 CVE-2022-2588 CVE-2022-21123 CVE-2022-21125 CVE-2022-21166 CVE-2022-21618 CVE-2022-21619 CVE-2022-21624 CVE-2022-21626 CVE-2022-21628 CVE-2022-26945 CVE-2022-30321 CVE-2022-30322 CVE-2022-30323 CVE-2022-39399 CVE-2022-41974 ==================================================================== 1. Summary: Red Hat OpenShift Container Platform release 4.8.53 is now available with updates to packages and images that fix several bugs and add enhancements. This release includes a security update for Red Hat OpenShift Container Platform 4.8. Red Hat Product Security has rated this update as having a security impact of Important. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. 2. Description: Red Hat OpenShift Container Platform is Red Hat's cloud computing Kubernetes application platform solution designed for on-premise or private cloud deployments. This advisory contains the container images for Red Hat OpenShift Container Platform 4.8.53. See the following advisory for the RPM packages for this release: https://access.redhat.com/errata/RHBA-2022:7873 Space precludes documenting all of the container images in this advisory. See the following Release Notes documentation, which will be updated shortly for this release, for details about these changes: https://docs.openshift.com/container-platform/4.8/release_notes/ocp-4-8-release-notes.html Security Fix(es): * go-getter: command injection vulnerability (CVE-2022-26945) * go-getter: unsafe download (issue 1 of 3) (CVE-2022-30321) * go-getter: unsafe download (issue 2 of 3) (CVE-2022-30322) * go-getter: unsafe download (issue 3 of 3) (CVE-2022-30323) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. 3. Solution: For OpenShift Container Platform 4.8 see the following documentation, which will be updated shortly for this release, for important instructions on how to upgrade your cluster and fully apply this asynchronous errata update: https://docs.openshift.com/container-platform/4.8/release_notes/ocp-4-8-release-notes.html You may download the oc tool and use it to inspect release image metadata for x86_64, s390x, and ppc64le architectures. The image digests may be found at https://quay.io/repository/openshift-release-dev/ocp-release?tab=tags The sha values for the release are: (For x86_64 architecture) The image digest is sha256:ac2bbfa7036c64bbdb44f9a74df3dbafcff1b851d812bf2a48c4fabcac3c7a53 (For s390x architecture) The image digest is sha256:ac2c74a664257cea299126d4f789cdf9a5a4efc4a4e8c2361b943374d4eb21e4 (For ppc64le architecture) The image digest is sha256:53adc42ed30ad39d7117837dbf5a6db6943a8f0b3b61bc0d046b83394f5c28b2 All OpenShift Container Platform 4.8 users are advised to upgrade to these updated packages and images when they are available in the appropriate release channel. To check for available updates, use the OpenShift Console or the CLI oc command. Instructions for upgrading a cluster are available at https://docs.openshift.com/container-platform/4.8/updating/updating-cluster-cli.html 4. Bugs fixed (https://bugzilla.redhat.com/): 2077100 - Console backend check for Web Terminal Operator incorrectly returns HTTP 204 2092918 - CVE-2022-30321 go-getter: unsafe download (issue 1 of 3) 2092923 - CVE-2022-30322 go-getter: unsafe download (issue 2 of 3) 2092925 - CVE-2022-30323 go-getter: unsafe download (issue 3 of 3) 2092928 - CVE-2022-26945 go-getter: command injection vulnerability 5. JIRA issues fixed (https://issues.jboss.org/): OCPBUGS-2205 - Prefer local dns does not work expectedly on OCPv4.8 OCPBUGS-2347 - [cluster-api-provider-baremetal] fix 4.8 build OCPBUGS-2577 - [4.8] ETCD Operator goes degraded when a second internal node ip is added OCPBUGS-2773 - e2e tests: Installs Red Hat Integration - 3scale operator test is failing due to change of Operator name OCPBUGS-2989 - [4.8] cri-o should report the stage of container and pod creation it's stuck at 6. References: https://access.redhat.com/security/cve/CVE-2021-45485 https://access.redhat.com/security/cve/CVE-2021-45486 https://access.redhat.com/security/cve/CVE-2022-2588 https://access.redhat.com/security/cve/CVE-2022-21123 https://access.redhat.com/security/cve/CVE-2022-21125 https://access.redhat.com/security/cve/CVE-2022-21166 https://access.redhat.com/security/cve/CVE-2022-21618 https://access.redhat.com/security/cve/CVE-2022-21619 https://access.redhat.com/security/cve/CVE-2022-21624 https://access.redhat.com/security/cve/CVE-2022-21626 https://access.redhat.com/security/cve/CVE-2022-21628 https://access.redhat.com/security/cve/CVE-2022-26945 https://access.redhat.com/security/cve/CVE-2022-30321 https://access.redhat.com/security/cve/CVE-2022-30322 https://access.redhat.com/security/cve/CVE-2022-30323 https://access.redhat.com/security/cve/CVE-2022-39399 https://access.redhat.com/security/cve/CVE-2022-41974 https://access.redhat.com/security/updates/classification/#important 7. Contact: The Red Hat security contact is <secalert@redhat.com>. More contact details at https://access.redhat.com/security/team/contact/ Copyright 2022 Red Hat, Inc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUBY3csZNzjgjWX9erEAQgVQg//dfbbERoUaVbqbL5MAgN43BOuYuiK0zT2 wkUXSTkIyLGkEqCU6KGhwbrUvMqye1Fef7MomJ0sXUj1MfUuV4FInczZmioJf59d JAKdJQ8wEsqCaedwB+an5bVY6CEGdhsiN4a3JubKfGNkWcVOEr55acdgmu+n0hMJ 6zGQKgJLfBLPU7V/OG5zb/F2/GE6gwvqDsrrCMe6yZ7O2RTHDDnVI+bG1twhOjNb M/wxjxMc3KxAl/32EQXQQnDdicl8Fg3KSCLnVfKwQMfN3O9Fj5AFdW3kT27MKKrF DVsXTEeiLPvvUcfbu2KoLUqwXNajIDLNPYmwdWHrVZpOJcSSwDKxd3TRD1X8a5FO 2ZCpqk/InKz/mzhun+XSsyqY/KrevPFxiBzhfbPZE2EhBRXARUad4ycBlfSCacf9 wwFHEwPDzZ4NygYc1s+2dI9P5tDB+K21XB0d/41yq5XheYonBSu3Ji9+dqMIq/4R Hb+xisN5QoaB+3pf6PMIrhlvNestYQ4TzOHdmEpJRZOehIJ49bJXtIRXq6uDj52b 7gvzoKpRdy3QZNBLNcrJPB0be9yE8chRaxMa++fviQbNamJm3NPVL5jBzBNrEINr a9u8YMzpCzskWP3HdBUZ2bLT2zTnvb3Qj0vKQcUzO/hwl2z3hNbE2L+zOfXfWypj jBUti9NswAw=uJJL -----END PGP SIGNATURE----- -- RHSA-announce mailing list RHSA-announce@redhat.com https://listman.redhat.com/mailman/listinfo/rhsa-announce

Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. The following packages have been upgraded to a later upstream version: kernel (4.18.0). Bug Fix(es): * DR, Ignore modify TTL if ConnectX-5 doesn't support it (BZ#2075549) * execve exit tracepoint not called (BZ#2106663) * Unable to boot RHEL-8.6 on Brazos max. config (Install is success) (BZ#2107475) * "vmcore failed, _exitcode:139" error observed while capturing vmcore during fadump after memory remove. incomplete vmcore is captured. (BZ#2107490) * soft lockups under heavy I/O load to ahci connected SSDs (BZ#2110773) * Allow substituting custom vmlinux.h for the build (BZ#2116407) 4. Description: Red Hat Advanced Cluster Management for Kubernetes 2.4.6 images Red Hat Advanced Cluster Management for Kubernetes provides the capabilities to address common challenges that administrators and site reliability engineers face as they work across a range of public and private cloud environments. Clusters and applications are all visible and managed from a single console—with security policy built in. See the following Release Notes documentation, which will be updated shortly for this release, for additional details about this release: https://access.redhat.com/documentation/en-us/red_hat_advanced_cluster_management_for_kubernetes/2.4/html/release_notes/ Security fixes: * golang: crypto/tls: session tickets lack random ticket_age_add (CVE-2022-30629) * moment: inefficient parsing algorithim resulting in DoS (CVE-2022-31129) * nodejs16: CRLF injection in node-undici (CVE-2022-31150) * nodejs/undici: Cookie headers uncleared on cross-origin redirect (CVE-2022-31151) * vm2: Sandbox Escape in vm2 (CVE-2022-36067) Bug fixes: * RHACM 2.4 using deprecated APIs in managed clusters (BZ# 2041540) * vSphere network name doesn't allow entering spaces and doesn't reflect YAML changes (BZ# 2074766) * cluster update status is stuck, also update is not even visible (BZ# 2079418) * Policy that creates cluster role is showing as not compliant due to Request entity too large message (BZ# 2088486) * Upgraded from RHACM 2.2-->2.3-->2.4 and cannot create cluster (BZ# 2089490) * ACM Console Becomes Unusable After a Time (BZ# 2097464) * RHACM 2.4.6 images (BZ# 2100613) * Cluster Pools with conflicting name of existing clusters in same namespace fails creation and deletes existing cluster (BZ# 2102436) * ManagedClusters in Pending import state after ACM hub migration (BZ# 2102495) 3. Solution: For Red Hat Advanced Cluster Management for Kubernetes, see the following documentation, which will be updated shortly for this release, for important instructions on installing this update: https://access.redhat.com/documentation/en-us/red_hat_advanced_cluster_management_for_kubernetes/2.4/html-single/install/index#installing 4. Bugs fixed (https://bugzilla.redhat.com/): 2041540 - RHACM 2.4 using deprecated APIs in managed clusters 2074766 - vSphere network name doesn't allow entering spaces and doesn't reflect YAML changes 2079418 - cluster update status is stuck, also update is not even visible 2088486 - Policy that creates cluster role is showing as not compliant due to Request entity too large message 2089490 - Upgraded from RHACM 2.2-->2.3-->2.4 and cannot create cluster 2092793 - CVE-2022-30629 golang: crypto/tls: session tickets lack random ticket_age_add 2097464 - ACM Console Becomes Unusable After a Time 2100613 - RHACM 2.4.6 images 2102436 - Cluster Pools with conflicting name of existing clusters in same namespace fails creation and deletes existing cluster 2102495 - ManagedClusters in Pending import state after ACM hub migration 2105075 - CVE-2022-31129 moment: inefficient parsing algorithm resulting in DoS 2109354 - CVE-2022-31150 nodejs16: CRLF injection in node-undici 2121396 - CVE-2022-31151 nodejs/undici: Cookie headers uncleared on cross-origin redirect 2124794 - CVE-2022-36067 vm2: Sandbox Escape in vm2 5. ========================================================================== Ubuntu Security Notice USN-5484-1 June 16, 2022 linux vulnerabilities ========================================================================== A security issue affects these releases of Ubuntu and its derivatives: - Ubuntu 14.04 ESM Summary: Several security issues were fixed in the Linux kernel. A privileged attacker could use this to bypass UEFI Secure Boot restrictions. (CVE-2022-21499) It was discovered that a race condition existed in the network scheduling subsystem of the Linux kernel, leading to a use-after-free vulnerability. A local attacker could use this to cause a denial of service (system crash) or possibly execute arbitrary code. (CVE-2021-39713) It was discovered that some Intel processors did not completely perform cleanup actions on multi-core shared buffers. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21123) It was discovered that some Intel processors did not completely perform cleanup actions on microarchitectural fill buffers. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21125) It was discovered that some Intel processors did not properly perform cleanup during specific special register write operations. A local attacker could possibly use this to expose sensitive information. (CVE-2022-21166) Update instructions: The problem can be corrected by updating your system to the following package versions: Ubuntu 14.04 ESM: linux-image-3.13.0-190-generic 3.13.0-190.241 linux-image-3.13.0-190-lowlatency 3.13.0-190.241 linux-image-generic 3.13.0.190.199 linux-image-lowlatency 3.13.0.190.199 linux-image-server 3.13.0.190.199 linux-image-virtual 3.13.0.190.199 Please note that fully mitigating processor vulnerabilities requires corresponding processor microcode/firmware updates. ATTENTION: Due to an unavoidable ABI change the kernel updates have been given a new version number, which requires you to recompile and reinstall all third party kernel modules you might have installed. Unless you manually uninstalled the standard kernel metapackages (e.g. linux-generic, linux-generic-lts-RELEASE, linux-virtual, linux-powerpc), a standard system upgrade will automatically perform this as well. (BZ#2109144) * ISST-LTE:[P10 Everest] [5.14.0-70.9.1.el9_0.ppc64le] HPT:RHEL9.0:ecolp95: lpar crashed at __list_del_entry_valid+0x90/0x100 and LPM failed (BZ#2112823) * [rhel9] livepatch panic: RIP: 0010:0xffffffffc0e070c4 seq_read_iter+0x124/0x4b0 (BZ#2122625) * System crashes due to list_add double add at iwl_mvm_mac_wake_tx_queue+0x71 (BZ#2123315) * [Dell EMC 9.0 BUG] Any process performing I/O doesn't fail on degraded LVM RAID and IO process hangs (BZ#2126215) * [HPEMC RHEL 9.0 REGRESSION] net, e810, ice: not enough device MSI-X vectors (BZ#2126491) * RHEL9.0 - zfcp: fix missing auto port scan and thus missing target ports (BZ#2127874) * Enable check-kabi (BZ#2132372) * Add symbols to stablelist (BZ#2132373) * Update RHEL9.1 kabi tooling (BZ#2132380) * kABI: Prepare the MM subsystem for kABI lockdown (BZ#2133464) * [Dell Storage 9.1 BUG] NVME command hang during storage array node reboot (BZ#2133553) * WARNING: CPU: 116 PID: 3440 at arch/x86/mm/extable.c:105 ex_handler_fprestore+0x3f/0x50 (BZ#2134589) * crypto/testmgr.c should not list dh, ecdh-nist-p256, ecdh-nist-p384 as .fips_allowed = 1 (BZ#2136523) * FIPS self-tests for RSA pkcs7 signature verification (BZ#2136552) * [ovs-tc] Bad length in dpctl/dump-flows (BZ#2137354) * [RHEL9] s_pf0vf2: hw csum failure for mlx5 (BZ#2137355) * kernel memory leak while freeing nested actions (BZ#2137356) * ovs: backports from upstream (BZ#2137358) * kernel should conform to FIPS-140-3 requirements (both parts) (BZ#2139095) * [DELL EMC 9.0-RT BUG] System is not booting into RT Kernel with perc12. (BZ#2139214) * Fix panic in nbd/004 test (BZ#2139535) * Nested KVM is not working on RHEL 8.6 with hardware error 0x7 (BZ#2140141) * [RHEL9] Practically limit "Dummy wait" workaround to old Intel systems (BZ#2142169) 4. -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 ==================================================================== Red Hat Security Advisory Synopsis: Moderate: kernel security and bug fix update Advisory ID: RHSA-2022:5937-01 Product: Red Hat Enterprise Linux Advisory URL: https://access.redhat.com/errata/RHSA-2022:5937 Issue date: 2022-08-09 CVE Names: CVE-2022-21123 CVE-2022-21125 CVE-2022-21166 ==================================================================== 1. Summary: An update for kernel is now available for Red Hat Enterprise Linux 7. Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section. 2. Relevant releases/architectures: Red Hat Enterprise Linux Client (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Client Optional (v. 7) - x86_64 Red Hat Enterprise Linux ComputeNode (v. 7) - noarch, x86_64 Red Hat Enterprise Linux ComputeNode Optional (v. 7) - x86_64 Red Hat Enterprise Linux Server (v. 7) - noarch, ppc64, ppc64le, s390x, x86_64 Red Hat Enterprise Linux Server Optional (v. 7) - ppc64, ppc64le, x86_64 Red Hat Enterprise Linux Workstation (v. 7) - noarch, x86_64 Red Hat Enterprise Linux Workstation Optional (v. 7) - x86_64 3. Description: The kernel packages contain the Linux kernel, the core of any Linux operating system. Security Fix(es): * Incomplete cleanup of multi-core shared buffers (aka SBDR) (CVE-2022-21123) * Incomplete cleanup of microarchitectural fill buffers (aka SBDS) (CVE-2022-21125) * Incomplete cleanup in specific special register write operations (aka DRPW) (CVE-2022-21166) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section. Bug Fix(es): * SolarFlare sfc spurious TX completion (BZ#1793280) * Page allocation failure on cryptsetup open (BZ#2072970) * The kernel-rt crashes where one task is indefinitely looping in __start_cfs_bandwidth() with the cfs_b->lock spinlock being held (BZ#2077346) * While using PTimekeeper the qede driver produces excessive log messages (BZ#2080646) * The kernel crashes due to a GPF happens in mutex_spin_on_owner(). The known RDMA/cma bug that was introduced with a patch from upstream commit 722c7b2bfead is the possible cause. (BZ#2085425) * Running LTP testcase creat09 fails showing related to 'cve-2018-13405' (BZ#2089360) * Crash when releasing inode which was on unmouted superblock (BZ#2096884) 4. Solution: For details on how to apply this update, which includes the changes described in this advisory, refer to: https://access.redhat.com/articles/11258 The system must be rebooted for this update to take effect. 5. Bugs fixed (https://bugzilla.redhat.com/): 2090237 - CVE-2022-21123 hw: cpu: Incomplete cleanup of multi-core shared buffers (aka SBDR) 2090240 - CVE-2022-21125 hw: cpu: Incomplete cleanup of microarchitectural fill buffers (aka SBDS) 2090241 - CVE-2022-21166 hw: cpu: Incomplete cleanup in specific special register write operations (aka DRPW) 6. Package List: Red Hat Enterprise Linux Client (v. 7): Source: kernel-3.10.0-1160.76.1.el7.src.rpm noarch: kernel-abi-whitelists-3.10.0-1160.76.1.el7.noarch.rpm kernel-doc-3.10.0-1160.76.1.el7.noarch.rpm x86_64: bpftool-3.10.0-1160.76.1.el7.x86_64.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-headers-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.x86_64.rpm perf-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux Client Optional (v. 7): x86_64: bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux ComputeNode (v. 7): Source: kernel-3.10.0-1160.76.1.el7.src.rpm noarch: kernel-abi-whitelists-3.10.0-1160.76.1.el7.noarch.rpm kernel-doc-3.10.0-1160.76.1.el7.noarch.rpm x86_64: bpftool-3.10.0-1160.76.1.el7.x86_64.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-headers-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.x86_64.rpm perf-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux ComputeNode Optional (v. 7): x86_64: bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux Server (v. 7): Source: kernel-3.10.0-1160.76.1.el7.src.rpm noarch: kernel-abi-whitelists-3.10.0-1160.76.1.el7.noarch.rpm kernel-doc-3.10.0-1160.76.1.el7.noarch.rpm ppc64: bpftool-3.10.0-1160.76.1.el7.ppc64.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-3.10.0-1160.76.1.el7.ppc64.rpm kernel-bootwrapper-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debug-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debuginfo-common-ppc64-3.10.0-1160.76.1.el7.ppc64.rpm kernel-devel-3.10.0-1160.76.1.el7.ppc64.rpm kernel-headers-3.10.0-1160.76.1.el7.ppc64.rpm kernel-tools-3.10.0-1160.76.1.el7.ppc64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.ppc64.rpm perf-3.10.0-1160.76.1.el7.ppc64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm python-perf-3.10.0-1160.76.1.el7.ppc64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm ppc64le: bpftool-3.10.0-1160.76.1.el7.ppc64le.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-bootwrapper-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debug-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debuginfo-common-ppc64le-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-devel-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-headers-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-tools-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.ppc64le.rpm perf-3.10.0-1160.76.1.el7.ppc64le.rpm perf-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm python-perf-3.10.0-1160.76.1.el7.ppc64le.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm s390x: bpftool-3.10.0-1160.76.1.el7.s390x.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm kernel-3.10.0-1160.76.1.el7.s390x.rpm kernel-debug-3.10.0-1160.76.1.el7.s390x.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.s390x.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm kernel-debuginfo-common-s390x-3.10.0-1160.76.1.el7.s390x.rpm kernel-devel-3.10.0-1160.76.1.el7.s390x.rpm kernel-headers-3.10.0-1160.76.1.el7.s390x.rpm kernel-kdump-3.10.0-1160.76.1.el7.s390x.rpm kernel-kdump-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm kernel-kdump-devel-3.10.0-1160.76.1.el7.s390x.rpm perf-3.10.0-1160.76.1.el7.s390x.rpm perf-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm python-perf-3.10.0-1160.76.1.el7.s390x.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.s390x.rpm x86_64: bpftool-3.10.0-1160.76.1.el7.x86_64.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-headers-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.x86_64.rpm perf-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux Server Optional (v. 7): ppc64: bpftool-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-debuginfo-common-ppc64-3.10.0-1160.76.1.el7.ppc64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.ppc64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.ppc64.rpm ppc64le: bpftool-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-debuginfo-common-ppc64le-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.ppc64le.rpm perf-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.ppc64le.rpm x86_64: bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux Workstation (v. 7): Source: kernel-3.10.0-1160.76.1.el7.src.rpm noarch: kernel-abi-whitelists-3.10.0-1160.76.1.el7.noarch.rpm kernel-doc-3.10.0-1160.76.1.el7.noarch.rpm x86_64: bpftool-3.10.0-1160.76.1.el7.x86_64.rpm bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-devel-3.10.0-1160.76.1.el7.x86_64.rpm kernel-headers-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-3.10.0-1160.76.1.el7.x86_64.rpm perf-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm Red Hat Enterprise Linux Workstation Optional (v. 7): x86_64: bpftool-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debug-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-debuginfo-common-x86_64-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm kernel-tools-libs-devel-3.10.0-1160.76.1.el7.x86_64.rpm perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm python-perf-debuginfo-3.10.0-1160.76.1.el7.x86_64.rpm These packages are GPG signed by Red Hat for security. Our key and details on how to verify the signature are available from https://access.redhat.com/security/team/key/ 7. References: https://access.redhat.com/security/cve/CVE-2022-21123 https://access.redhat.com/security/cve/CVE-2022-21125 https://access.redhat.com/security/cve/CVE-2022-21166 https://access.redhat.com/security/updates/classification/#moderate 8. Contact: The Red Hat security contact is <secalert@redhat.com>. More contact details at https://access.redhat.com/security/team/contact/ Copyright 2022 Red Hat, Inc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUBYvKiCNzjgjWX9erEAQgz2A/+O9gKIbQCWne03iCkr+RZwdgghaS4zC6Z 8/iPJhQf3ZKdVQ1/otcA4SK+AwazrjOJx5Dnn5kTY+5Vc/xJQ0/lX5wmWggzZxgz tX+f/BDwU47c7Ie1oXHgIalaVZ3jzIXS9fWuKcry9uLP9QoXPuWSj+eP1Cm3wiLW +xY5AKIIhFHE7UYc2U3hNfBVy15dcGiTeVHr/Mmk9/fTFu88RgSuZPWiUi+MJAo+ U2UfnpCkom7isYR86HP44uGc2BZf2pRqi4b/iICVHA/dV93FZ1ldlS6fZIIXTYxV 8RtRakX9yrB4OLtpIFYpWQth04H+h5gMAiam7MZws8VtjYgWYcwU8kPhS+hf0W4I uEd1fRU0F7QYrgjrxioPMW7ImPuklDtUELq3laXHyy+wDs3deZQ9csGWCqaPyTkK /jnnWMAQzB6ZYX4bmXwFtkAEmA7Dx3S4DP6SMW0yt7y+xmg2WGP8SHp3nxBlqbbv nOpY35/HWQpKsYU91Z0i/DN/BmDnmsMOqEU6bAYnGZezbwUnl+OlKF2DoAaQLvBQ aVfHcXhKLL1nRI8HNt98YxJHaf4dtTJCSCWnO/xdaZcDkCWMCReB2PGxzL5MEbTc 7pOvB7yANf+aztsAee3dOCZTMnDDh10mgb+NelQgR5nQRxYpw7YY3JCwy/bSO3Na btaLByp4p3I=VyEw -----END PGP SIGNATURE----- -- RHSA-announce mailing list RHSA-announce@redhat.com https://listman.redhat.com/mailman/listinfo/rhsa-announce . Bugs fixed (https://bugzilla.redhat.com/): 2107342 - CVE-2022-30631 golang: compress/gzip: stack exhaustion in Reader.Read 5. 8) - aarch64, noarch, ppc64le, s390x, x86_64 3. Bug Fix(es): * Bad page state in process qemu-kvm pfn:68a74600 (BZ#2081013) * slub corruption during LPM of hnv interface (BZ#2081250) * Affinity broken due to vector space exhaustion (BZ#2084646) * 'rmmod pmt_telemetry' panics on ADL-P IOTG (BZ#2091079) * Unable to boot RHEL-8.6 on Brazos max. config (Install is success) (BZ#2092241) * kernel crash after reboot of T14/G2 AMD laptop (mt7921e module) (BZ#2095654) * mt7921: free resources on pci_probe error path (BZ#2101684) * NLM should be more defensive if underlying FS changes fl_owner (BZ#2102099) * RHEL8/async-pf Guest call trace when reboot after postcopy migration with high stress workload (BZ#2105340) * execve exit tracepoint not called (BZ#2106662) * QProcess dead lock on kernel-4.18.0-358 (BZ#2107643) * KVM fix guest FPU uABI size to kvm_xsave (BZ#2107652) * KVM selftests fail to compile (BZ#2107655) * Some monitor have no display with AMD W6400 when boot into OS. (BZ#2109826) * Percpu counter usage is gradually getting increasing during podman container recreation. (BZ#2110039) * multipath failed to recover after EEH hit on flavafish adapter on Denali(qla2xxx/flavafish/RHEL8.6/Denali) (BZ#2110768) * soft lockups under heavy I/O load to ahci connected SSDs (BZ#2110772) * trouble re-assigning MACs to VFs, ice stricter than other drivers (BZ#2111936) * Intel MPI 2019.0 - mpirun stuck on latest kernel (BZ#2112030) * Multicast packets are not received by all VFs on the same port even though they have the same VLAN (BZ#2117026) * Hyper-V 2019 Dynamic Memory Problem hv_balloon (BZ#2117050) * kernel BUG at kernel/sched/deadline.c:1561! (BZ#2117410) * ALSA (sound) driver - update Intel SOF kcontrol code (BZ#2117732) * bridge over bond over ice ports has no connection (BZ#2118580) * Fix max VLANs available for VF (BZ#2118581) * offline selftest failed (BZ#2118582) * INTEL NVMUpdate utility ver 3.20 is failing to update firmware on E810-XXVDA4T (WPC) (BZ#2118583) * VM configured with failover interface will coredump after been migrating from source host to target host(only iavf driver) (BZ#2118705) * Fix max VLANs available for untrusted VF (BZ#2118707) * Softlockup on infinite loop in task_get_css() for a CSS_DYING cpuset (BZ#2120776) Enhancement(s): * KVM Sapphire Rapids (SPR) AMX Instructions (BZ#2088287) * KVM Sapphire Rapids (SPR) AMX Instructions part2 (BZ#2088288) * ice: Driver Update (BZ#2102359) * iavf: Driver Update (BZ#2102360) * iommu/vt-d: Make DMAR_UNITS_SUPPORTED a config setting (BZ#2112983) 4

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions. (DoS) It may be in a state. The platform monitors the network by collecting real-time information on the network, users and devices, and formulating and implementing corresponding policies

A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability exists because administrative privilege levels for sensitive data are not properly enforced. An attacker with read-only privileges for the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information about the system configuration. The platform monitors the network by collecting real-time information on the network, users and devices, and formulating and implementing corresponding policies

Vulnerabilities in the Drive Composer allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Drive Composer installer file allows a low-privileged user to run a "repair" operation on the product. ABB of automation builder , Drive composer , mint workbench Exists in a link interpretation vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. This vulnerability allows local attackers to escalate privileges on affected installations of ABB Automation Builder Platform. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.The specific flaw exists within the Drive Composer installer. By creating a symbolic link, an attacker can abuse the installer to overwrite a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM

An information disclosure vulnerability exists in the License registration functionality of Bachmann Visutec GmbH Atvise 3.5.4, 3.6 and 3.7. A plaintext HTTP request can lead to a disclosure of login credentials. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. atvise There are vulnerabilities in inadequate protection of credentials.Information may be obtained. Bachmann Visutec GmbH Atvise is a full-featured network HMI and SCADA system using pure network technology from Bachmann Visutec GmbH in Austria

Vulnerabilities in the Mint WorkBench allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Mint WorkBench installer file allows a low-privileged user to run a "repair" operation on the product. ABB of mint workbench Exists in a permission management vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state

A vulnerability in the web-based management interface of Cisco AppDynamics Controller Software could allow an unauthenticated, remote attacker to access a configuration file and the login page for an administrative console that they would not normally have authorization to access. This vulnerability is due to improper authorization checking for HTTP requests that are submitted to the affected web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected instance of AppDynamics Controller. A successful exploit could allow the attacker to access the login page for an administrative console. AppDynamics has released software updates that address this vulnerability. Cisco AppDynamics Controller Software Exists in a vulnerability related to the lack of authentication.Information may be obtained. Cisco AppDynamics Controller monitors and analyzes full-stack data through precise tracking and analysis across highly distributed application environments

Vulnerabilities in the Drive Composer allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Drive Composer installer file allows a low-privileged user to run a "repair" operation on the product. ABB of automation builder , Drive composer , mint workbench Exists in a link interpretation vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. This vulnerability allows local attackers to escalate privileges on affected installations of ABB Automation Builder Platform. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.The specific flaw exists within the Drive Composer installer. By creating a symbolic link, an attacker can abuse the installer to create a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM

Vulnerabilities in the Drive Composer allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Drive Composer installer file allows a low-privileged user to run a "repair" operation on the product. ABB of automation builder , Drive composer , mint workbench Exists in a link interpretation vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. This vulnerability allows local attackers to escalate privileges on affected installations of ABB Automation Builder Platform. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.The specific flaw exists within the Drive Composer installer. By creating a symbolic link, an attacker can abuse the installer to overwrite a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM

Observable behavioral in power management throttling for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via network access. Intel's * Exists in observable mismatch vulnerabilities.Information may be obtained

Vulnerabilities in the Drive Composer allow a low privileged attacker to create and write to a file anywhere on the file system as SYSTEM with arbitrary content as long as the file does not already exist. The Drive Composer installer file allows a low-privileged user to run a "repair" operation on the product. ABB of automation builder , Drive composer , mint workbench Exists in a link interpretation vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. This vulnerability allows local attackers to escalate privileges on affected installations of ABB Automation Builder Platform. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.The specific flaw exists within the Drive Composer installer. By creating a symbolic link, an attacker can abuse the installer to overwrite a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM

Zooms On-Premise Meeting Connector MMR before version 4.8.113.20220526 fails to properly check the permissions of a Zoom meeting attendee. As a result, a threat actor in the Zooms waiting room can join the meeting without the consent of the host

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device. (DoS) It may be in a state

Cisco Catalyst 2940 Series Switches provided by Cisco Systems, Inc. contain a reflected cross-site scripting vulnerability regarding error page generation. An arbitrary script may be executed on the web browser of the user who is using the product. The affected firmware is prior to 12.2(50)SY released in 2011, and Cisco Catalyst 2940 Series Switches have been retired since January 2015. (CWE-79) Vulnerability exists. This vulnerability is 2011 Released in the year 12.2(50)SY Is being dealt with (Cisco bug id: CSCek36997) .. In addition, the product 2015 A year End-of-Support It has become. This vulnerability information is based on the Information Security Early Warning Partnership. IPA Report to JPCERT/CC Coordinated with the developer

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). The affected application contains a misconfiguration in the APT update. This could allow an attacker to add insecure packages to the application. SINEMA Remote Connect is a remote network management platform for easy management of tunnel connections (VPN) between headquarters, service technicians and installed machines or plants

An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request. WAVLINK AERIAL X 1200M is a WiFi extender from China WAVLINK company. An attacker can use this vulnerability to execute arbitrary commands

A vulnerability in live_check.shtml of WAVLINK WN535 G3 M35G3R.V5030.180927 allows attackers to obtain sensitive router information via execution of the exec cmd function. WAVLINK WN535 G3 is a wireless router from China WAVLINK company. There is an information disclosure vulnerability in WAVLINK WN535 G3 M35G3R.V5030.180927. The vulnerability is caused by improper authorization management on the live_check.shtml page

A vulnerability has been identified in Spectrum Power 4 (All versions using Shared HIS), Spectrum Power 7 (All versions using Shared HIS), Spectrum Power MGMS (All versions using Shared HIS). An unauthenticated attacker could log into the component Shared HIS used in Spectrum Power systems by using an account with default credentials. A successful exploitation could allow the attacker to access the component Shared HIS with administrative privileges