VARIoT IoT vulnerabilities database

A vulnerability was found in Totolink X2000R 1.0.0-B20221212.1452. It has been declared as critical. This vulnerability affects the function formTmultiAP of the file /bin/boa of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249856. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. TOTOLINK of x2000r An out-of-bounds write vulnerability exists in firmware.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. TOTOLINK X2000R is a wireless router from China's TOTOLINK Electronics. Totolink X2000R has a buffer overflow vulnerability, which is caused by the function formTmultiAP in the file /bin/boa failing to correctly verify the length of the input data. Attackers can exploit this vulnerability to execute arbitrary code on the system or cause a denial of service

A vulnerability was found in Totolink T6 4.1.9cu.5241_B20210923. It has been classified as critical. This affects the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument v41 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249855. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. TOTOLINK of t6 Firmware has a classic buffer overflow vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. TOTOLINK T6 is a wireless dual-band router made by China's Zeon Electronics (TOTOLINK) company. Remote attackers can exploit this vulnerability. Execute arbitrary code on the system or cause a denial of service attack

A vulnerability has been identified in JT2Go (All versions < V14.3.0.6), Teamcenter Visualization V13.3 (All versions < V13.3.0.13), Teamcenter Visualization V14.1 (All versions < V14.1.0.12), Teamcenter Visualization V14.2 (All versions < V14.2.0.9), Teamcenter Visualization V14.3 (All versions < V14.3.0.6). The affected applications contain a stack overflow vulnerability while parsing specially crafted CGM files. This could allow an attacker to execute code in the context of the current process. Siemens' JT2Go and Teamcenter Visualization Exists in a stack-based buffer overflow vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state

A vulnerability has been identified in JT2Go (All versions < V14.3.0.6), Teamcenter Visualization V13.3 (All versions < V13.3.0.13), Teamcenter Visualization V14.1 (All versions < V14.1.0.12), Teamcenter Visualization V14.2 (All versions < V14.2.0.9), Teamcenter Visualization V14.3 (All versions < V14.3.0.6). The affected applications contain a stack overflow vulnerability while parsing specially crafted CGM files. This could allow an attacker to execute code in the context of the current process. Siemens' JT2Go and Teamcenter Visualization Exists in a stack-based buffer overflow vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state

A vulnerability has been identified in JT2Go (All versions < V14.3.0.6), Teamcenter Visualization V13.3 (All versions < V13.3.0.13), Teamcenter Visualization V14.1 (All versions < V14.1.0.12), Teamcenter Visualization V14.2 (All versions < V14.2.0.9), Teamcenter Visualization V14.3 (All versions < V14.3.0.6). The affected applications contain a null pointer dereference vulnerability while parsing specially crafted CGM files. An attacker could leverage this vulnerability to crash the application causing denial of service condition. Siemens' JT2Go and Teamcenter Visualization for, NULL There is a vulnerability in pointer dereference.Service operation interruption (DoS) It may be in a state

A vulnerability has been identified in JT2Go (All versions < V14.3.0.6), Teamcenter Visualization V13.3 (All versions < V13.3.0.13), Teamcenter Visualization V14.1 (All versions < V14.1.0.12), Teamcenter Visualization V14.2 (All versions < V14.2.0.9), Teamcenter Visualization V14.3 (All versions < V14.3.0.6). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted CGM files. This could allow an attacker to execute code in the context of the current process. Siemens' JT2Go and Teamcenter Visualization Exists in an out-of-bounds read vulnerability.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state

A vulnerability has been identified in SIMATIC IPC1047E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows), SIMATIC IPC647E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows), SIMATIC IPC847E (All versions with maxView Storage Manager < V4.14.00.26068 on Windows). In default installations of maxView Storage Manager where Redfish® server is configured for remote system management, a vulnerability has been identified that can provide unauthorized access. SIMATIC IPC (Industrial PC) is a PC-based automation hardware platform from Siemens

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The "intermediate installation" system state of the affected application uses default credential with admin privileges. An attacker could use the credentials to gain complete control of the affected device. Siemens' simatic cn 4100 contains a vulnerability related to the use of default credentials.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. SIMATIC CN 4100 is a communication node that can connect to third-party systems

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The affected application allows IP configuration change without authentication to the device. This could allow an attacker to cause denial of service condition. Siemens' simatic cn 4100 Exists in unspecified vulnerabilities.Service operation interruption (DoS) It may be in a state. SIMATIC CN 4100 is a communication node that can connect to third-party systems. Siemens SIMATIC CN 4100 has an input validation error vulnerability that can be exploited by attackers to cause a denial of service

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The "intermediate installation" system state of the affected application allows an attacker to add their own login credentials to the device. This allows an attacker to remotely login as root and take control of the device even after the affected device is fully set up. SIMATIC CN 4100 is a communication node that can connect to third-party systems

A vulnerability has been identified in Spectrum Power 7 (All versions < V23Q4). The affected product's sudo configuration permits the local administrative account to execute several entries as root user. This could allow an authenticated local attacker to inject arbitrary code and gain root access. Spectrum Power 7 provides the basic components of SCADA, communication and data modeling for control and monitoring systems. Application suites can be added to optimize network and power generation management in all energy management areas

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05.20), CP-8050 MASTER MODULE (All versions < CPCI85 V05.20). The network configuration service of affected devices contains a flaw in the conversion of ipv4 addresses that could lead to an uninitialized variable being used in succeeding validation steps. By uploading specially crafted network configuration, an authenticated remote attacker could be able to inject commands that are executed on the device with root privileges during device startup. The SICAM A8000 rtu (remote terminal unit) series is a modular device family for telecontrol and automation applications in all energy supply sectors

Tenda A18 v15.13.07.09 was discovered to contain a stack overflow via the devName parameter in the formSetDeviceName function. Tenda A18 is an AC1200 dual-band Wi-Fi repeater from China's Tenda Company. Tenda A18 v15.13.07.09 version has a buffer overflow vulnerability. This vulnerability is caused by the devName parameter in the formSetDeviceName function failing to correctly verify the length of the input data. A remote attacker can use this vulnerability to execute arbitrary code on the system or cause a denial of Service attacks

An issue was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices. Command injection can occur because the system function is used by davinci to unpack language packs without strict filtering of URL strings. TRENDnet TV-IP1314PI is a wireless network camera from the American Trend Network (TRENDnet) company. TRENDnet TV-IP1314PI has a command injection vulnerability. An attacker can use this vulnerability to cause command injection

A stack-based buffer overflow was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices, leading to arbitrary command execution. This occurs because of lack of length validation during an sscanf of a user-entered scale field in the RTSP playback function of davinci. TRENDnet TV-IP1314PI is a wireless network camera from the American Trend Network (TRENDnet) company. TRENDnet TV-IP1314PI has a buffer overflow vulnerability

A vulnerability was found in Totolink NR1800X 9.1.0u.6279_B20210910 and classified as critical. Affected by this issue is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249854 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. TOTOLINK NR1800X is an excellent 5G NR indoor Wi-Fi and SIP CPE from the Chinese company Zeon Electronics (TOTOLINK). Designed to provide fast and easy deployment of NR fixed data services to homes and offices. Totolink NR1800X version 9.1.0u.6279_B20210910 has a buffer overflow vulnerability. The vulnerability originates from the failure of the function loginAuth in the file /cgi-bin/cstecgi.cgi to correctly verify the length of the input data. A remote attacker can exploit this vulnerability on the system. Execute arbitrary code or cause a denial of service attack

A vulnerability has been found in Totolink N350RT 9.3.5u.6139_B202012 and classified as critical. Affected by this vulnerability is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249853 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. TOTOLINK N350RT is a small home router from China's Zeon Electronics (TOTOLINK) company. A remote attacker can exploit this vulnerability on the system. Execute arbitrary code or cause a denial of service attack

Under certain conditions, Internet Communication Manager (ICM) or SAP Web Dispatcher - versions KERNEL 7.22, KERNEL 7.53, KERNEL 7.54, KRNL64UC 7.22, KRNL64UC 7.22EXT, KRNL64UC 7.53, KRNL64NUC 7.22, KRNL64NUC 7.22_EXT, WEBDISP 7.22_EXT, WEBDISP 7.53, WEBDISP 7.54, could allow an attacker to access information which would otherwise be restricted causing high impact on confidentiality. SAP of SAP NetWeaver Exists in unspecified vulnerabilities.Information may be obtained

TP-Link Tapo APK up to v2.12.703 uses hardcoded credentials for access to the login panel.

A vulnerability, which was classified as critical, was found in Totolink N350RT 9.3.5u.6139_B202012. Affected is the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to stack-based buffer overflow. It is possible to launch the attack remotely. The identifier of this vulnerability is VDB-249852. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. TOTOLINK of n350rt A stack-based buffer overflow vulnerability exists in the firmware.Information is obtained, information is tampered with, and service operation is interrupted. (DoS) It may be in a state. TOTOLINK N350RT is a small home router from China's Zeon Electronics (TOTOLINK) company. This vulnerability originates from the failure of the password parameter of the loginAuth function in the /cgi-bin/cstecgi.cgi page to correctly verify the length of the input data. A remote attacker can use this vulnerability to execute arbitrary code on the system. or result in a denial of service attack