VARIoT IoT vulnerabilities database

RunExeFile.exe in the installer for DEWESoft X3 SP1 (64-bit) devices does not require authentication for sessions on TCP port 1999, which allows remote attackers to execute arbitrary code or access internal commands, as demonstrated by a RUN command that launches a .EXE file located at an arbitrary external URL, or a "SETFIREWALL Off" command. DEWESoft Contains a code injection vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. DEWESoftX3SP1 is a device for industrial measurement. A security vulnerability exists in the RunExeFile.exe file in the DEWESoftX3SP1 (64-bit) device that originated from the program requiring authentication for sessions on the TCP1999 port. A remote attacker could exploit the vulnerability to execute arbitrary code or access internal commands

A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable. MikroTik RouterOS Contains a buffer error vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. MikroTik RouterOS is a routing operating system developed by MikroTik based on the Linux kernel. By installing this system, standard x86 PC devices can be turned into professional routers. A buffer overflow vulnerability exists in MikroTik RouterOS 6.41.3 and earlier. MikroTik RouterOS is prone to a buffer-overflow vulnerability because it fails to properly bounds-check user-supplied data before copying it into an insufficiently sized buffer. Failed exploit attempts will result in denial-of-service conditions. This system turns a PC computer into a professional router. SMB service is one of the SMB (communication protocol) services

Format String vulnerability in KeepKey version 4.0.0 allows attackers to trigger information display (of information that should not be accessible), related to text containing characters that the device's font lacks. KeepKey Contains an information disclosure vulnerability.Information may be obtained. KEYHODLERSKeepKey is a device used by KEYHODLERS in the United States to store bitcoin. A format string vulnerability exists in KEYHODLERSKeepKey version 4.0.0. An attacker could exploit the vulnerability to access information that is not authorized to access

A vulnerability in the conferencing component of Mitel Connect ONSITE, versions R1711-PREM and earlier, and Mitel ST 14.2, release GA28 and earlier, could allow an unauthenticated attacker to inject PHP code using specially crafted requests to the vendrecording.php page. Successful exploit could allow an attacker to execute arbitrary PHP code within the context of the application. Mitel Connect ONSITE and ST 14.2 Contains a code injection vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state

A vulnerability in the conferencing component of Mitel Connect ONSITE, versions R1711-PREM and earlier, and Mitel ST 14.2, release GA28 and earlier, could allow an unauthenticated attacker to copy a malicious script into a newly generated PHP file and then execute the generated file using specially crafted requests. Successful exploit could allow an attacker to execute arbitrary code within the context of the application. Mitel Connect ONSITE and ST 14.2 Contains a code injection vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state

A vulnerability in the conferencing component of Mitel Connect ONSITE, versions R1711-PREM and earlier, and Mitel ST 14.2, release GA28 and earlier, could allow an unauthenticated attacker to inject PHP code using specially crafted requests to the vnewmeeting.php page. Successful exploit could allow an attacker to execute arbitrary PHP code within the context of the application. Mitel Connect ONSITE and ST 14.2 Contains a code injection vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state

A vulnerability in the conferencing component of Mitel Connect ONSITE, versions R1711-PREM and earlier, and Mitel ST 14.2, release GA28 and earlier, could allow an unauthenticated attacker to inject PHP code using specially crafted requests to the vsethost.php page. Successful exploit could allow an attacker to execute arbitrary PHP code within the context of the application. Mitel Connect ONSITE and ST 14.2 Contains a code injection vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state

In Omron CX-Supervisor Versions 3.30 and prior, use after free vulnerabilities can be exploited when CX Supervisor parses a specially crafted project file. Provided by OMRON Corporation CX-Supervisor Contains the following multiple vulnerabilities: * * Stack-based buffer overflow (CWE-121) - CVE-2018-7513 ∙ Stack-based buffer overflow may occur due to processing of specially crafted project files. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Memory double release (CWE-415) - CVE-2018-7523 This is a memory double release vulnerability caused by processing of specially crafted project files. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the processing of project files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. There is a free use vulnerability in the Omron CX-Supervisor 3.30 version. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a stack-based buffer overflow. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Freed memory used (CWE-416) - CVE-2018-7521 This is a vulnerability in the use of released memory due to processing of specially crafted project files. * * Memory double release (CWE-415) - CVE-2018-7523 This is a memory double release vulnerability caused by processing of specially crafted project files. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the parsing of SCS project files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code under the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. A buffer overflow vulnerability exists in Omron CX-Supervisor 3.30 and earlier. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a heap-based buffer overflow. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Freed memory used (CWE-416) - CVE-2018-7521 This is a vulnerability in the use of released memory due to processing of specially crafted project files. * * Memory double release (CWE-415) - CVE-2018-7523 This is a memory double release vulnerability caused by processing of specially crafted project files. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the processing of SCS project files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, heap-based buffer. An attacker can leverage this vulnerability to execute code under the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause an out of bounds vulnerability. Provided by OMRON Corporation CX-Supervisor Contains the following multiple vulnerabilities: * * Stack-based buffer overflow (CWE-121) - CVE-2018-7513 ∙ Stack-based buffer overflow may occur due to processing of specially crafted project files. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Heap-based buffer overflow (CWE-122) - CVE-2018-7519 ∙ A heap-based buffer overflow may occur due to processing of a specially crafted project file. * * Freed memory used (CWE-416) - CVE-2018-7521 This is a vulnerability in the use of released memory due to processing of specially crafted project files. * * Memory double release (CWE-415) - CVE-2018-7523 This is a memory double release vulnerability caused by processing of specially crafted project files. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the parsing of SCS project files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code under the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan. An out-of-bounds read vulnerability exists in Omron CX-Supervisor 3.30 and earlier versions

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a double free vulnerability. Provided by OMRON Corporation CX-Supervisor Contains the following multiple vulnerabilities: * * Stack-based buffer overflow (CWE-121) - CVE-2018-7513 ∙ Stack-based buffer overflow may occur due to processing of specially crafted project files. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Heap-based buffer overflow (CWE-122) - CVE-2018-7519 ∙ A heap-based buffer overflow may occur due to processing of a specially crafted project file. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the parsing of SCS project files. When parsing a malformed scatter chart object, the process does not properly validate the existence of an object prior to performing operations on it. An attacker can leverage this vulnerability to execute code under the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan

In Omron CX-Supervisor Versions 3.30 and prior, processing a malformed packet by a certain executable may cause an untrusted pointer dereference vulnerability. Provided by OMRON Corporation CX-Supervisor Contains the following multiple vulnerabilities: * * Stack-based buffer overflow (CWE-121) - CVE-2018-7513 ∙ Stack-based buffer overflow may occur due to processing of specially crafted project files. * * Uninitialized pointer access (CWE-824) - CVE-2018-7515 There is a possibility of accessing an uninitialized pointer due to the processing of a specially crafted packet. * * Write outside memory boundary (CWE-787) - CVE-2018-7517 ∙ There is a possibility of writing outside the memory boundary due to processing of a specially crafted project file. * * Heap-based buffer overflow (CWE-122) - CVE-2018-7519 ∙ A heap-based buffer overflow may occur due to processing of a specially crafted project file. * * Freed memory used (CWE-416) - CVE-2018-7521 This is a vulnerability in the use of released memory due to processing of specially crafted project files. * * Memory double release (CWE-415) - CVE-2018-7523 This is a memory double release vulnerability caused by processing of specially crafted project files. * * Untrusted pointer reference (CWE-822) - CVE-2018-7525 There is a possibility of referring to untrusted pointers due to processing of specially crafted packets.A remote attacker could execute arbitrary code. This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of OMRON CX-Supervisor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.The specific flaw exists within the parsing of CDM file. The issue results from the lack of proper validation of a user-supplied value prior to dereferencing it as a pointer. An attacker can leverage this vulnerability to execute code under the context of the current process. CX-Supervisor is a Miscellaneous Shareware software. CX-Supervisor is dedicated to the design and operation of PC visualization and machine control. Omron CX-Supervisor is prone to the following security vulnerabilities: 1. A stack-based buffer-overflow vulnerability 2. A heap-based buffer-overflow vulnerability 3. Omron CX-Supervisor Versions 3.30 and prior are vulnerable; other versions may also be affected. Omron CX-Supervisor is a visual machine controller produced by Omron Corporation of Japan

An issue was discovered on TP-Link TL-WR886N 6.0 2.3.4 and TL-WR886N 7.0 1.1.0 devices. Authenticated attackers can crash router services (e.g., inetd, HTTP, DNS, and UPnP) via long JSON data for firewall lan_manage mac2. TP-Link TL-WR886N The device contains an input validation vulnerability.Service operation interruption (DoS) There is a possibility of being put into a state. TP-LinkTL-WR886N is a wireless router product of China TP-LINK. There are security vulnerabilities in TP-LinkTL-WR886N6.02.3.4 and 7.01.1.0. A security vulnerability exists in TP-Link TL-WR886N 6.0 2.3.4 version and 7.0 1.1.0 version

Authentication bypass in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Authentication firmware contains an authentication vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea. There is a security flaw in Hanwha Techwin Smartcams

Denial of service by uploading malformed firmware in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Contains a data processing vulnerability.Denial of service (DoS) May be in a state. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea. There is a security flaw in Hanwha Techwin Smartcams

Unsecured way of firmware update in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Authentication firmware contains an authentication vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. There is currently no detailed vulnerability description. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea. There is a security flaw in Hanwha Techwin Smartcams

Remote password change in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Vulnerabilities related to certificate and password management exist in the firmware.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea. There is a security flaw in Hanwha Techwin Smartcams

Buffer overflow in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Contains a buffer error vulnerability.Information is obtained, information is altered, and service operation is disrupted (DoS) There is a possibility of being put into a state. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. HanwhaTechwinSmartcam has a buffer overflow vulnerability that can be exploited by an attacker to cause a denial of service. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea

Arbitrary camera access and monitoring via cloud in Hanwha Techwin Smartcams. Hanwha Techwin Smartcam Contains firmware, authorization, authority, and access control vulnerabilities.Information may be obtained. HanwhaTechwinSmartcam is a series of security surveillance cameras based on cloud services. Hanwha Techwin Smartcams is a cloud-based security monitoring device from Hanwha Korea. There is a security flaw in Hanwha Techwin Smartcams