ID

VAR-201102-0212

CVE

CVE-2011-0354

TITLE

Cisco Tandberg E, EX, and C Series default root credentials

DESCRIPTION

The default configuration of Cisco Tandberg C Series Endpoints, and Tandberg E and EX Personal Video units, with software before TC4.0.0 has a blank password for the root account, which makes it easier for remote attackers to obtain access via an unspecified login method. The software version of the Tandberg unit can be determined by logging into the web-based user interface (UI) or using the “xStatus SystemUnit” command. Users can determine the Tandberg software version by entering the IP address of the codec in a web browser, authenticating (if the device is configured for authentication), and then selecting the “system info” menu option. The version number is displayed after the “Software Version” label in the System Info box. Alternatively the software version can be determined from the device's application programmer interface using the “xStatus SystemUnit” command. The software version running on the codec is displayed after the “SystemUnit Software Version” label. The output from “xStatus SystemUnit” will display a result similar to the following:” xStatus SystemUnit * *s SystemUnit ProductType: “Cisco TelePresence Codec” *s SystemUnit ProductId: “Cisco TelePresence Codec C90” *s SystemUnit ProductPlatform: “C90” *s SystemUnit Uptime: 597095 *s SystemUnit Software Application: “Endpoint” *s SystemUnit Software Version: “TC4.0” *s SystemUnit Software Name: “s52000” *s SystemUnit Software ReleaseDate: “2010-11-01” *s SystemUnit Software MaxVideoCalls: 3 *s SystemUnit Software MaxAudioCalls: 4 *s SystemUnit Software ReleaseKey: “true” *s SystemUnit Software OptionKeys NaturalPresenter: “true” *s SystemUnit Software OptionKeys MultiSite: “true” *s SystemUnit Software OptionKeys PremiumResolution: “true” *s SystemUnit Hardware Module SerialNumber: “B1AD25A00003” *s SystemUnit Hardware Module Identifier: “0” *s SystemUnit Hardware MainBoard SerialNumber: “PH0497201” *s SystemUnit Hardware MainBoard Identifier: “101401-3 [04]“ *s SystemUnit Hardware VideoBoard SerialNumber: “PH0497874” *s SystemUnit Hardware VideoBoard Identifier: “101560-1 [02]“ *s SystemUnit Hardware AudioBoard SerialNumber: “N/A” *s SystemUnit Hardware AudioBoard Identifier: ”“ *s SystemUnit Hardware BootSoftware: “U-Boot 2009.03-65” *s SystemUnit State System: Initialized *s SystemUnit State MaxNumberOfCalls: 3 *s SystemUnit State MaxNumberOfActiveCalls: 3 *s SystemUnit State NumberOfActiveCalls: 1 *s SystemUnit State NumberOfSuspendedCalls: 0 *s SystemUnit State NumberOfInProgressCalls: 0 *s SystemUnit State Subsystem Application: Initialized *s SystemUnit ContactInfo: “helpdesk@company.com” ** endA third party who has access to the product may gain administrator privileges. Cisco's multiple TANDBERG products have security vulnerabilities that allow local malicious users to gain control of the product. Determine the version of Tandberg. An attacker can exploit this issue to gain unauthorized root access to the affected devices. Successful exploits will result in the complete compromise of the affected device. ---------------------------------------------------------------------- Secure your corporate defenses and reduce complexity in handling vulnerability threats with the new Secunia Vulnerability Intelligence Manager (VIM). Request a free trial: http://secunia.com/products/corporate/vim/ ---------------------------------------------------------------------- TITLE: TANDBERG Products Root Default Password Security Issue SECUNIA ADVISORY ID: SA43158 VERIFY ADVISORY: Secunia.com http://secunia.com/advisories/43158/ Customer Area (Credentials Required) https://ca.secunia.com/?page=viewadvisory&vuln_id=43158 RELEASE DATE: 2011-02-04 DISCUSS ADVISORY: http://secunia.com/advisories/43158/#comments AVAILABLE ON SITE AND IN CUSTOMER AREA: * Last Update * Popularity * Comments * Criticality Level * Impact * Where * Solution Status * Operating System / Software * CVE Reference(s) http://secunia.com/advisories/43158/ ONLY AVAILABLE IN CUSTOMER AREA: * Authentication Level * Report Reliability * Secunia PoC * Secunia Analysis * Systems Affected * Approve Distribution * Remediation Status * Secunia CVSS Score * CVSS https://ca.secunia.com/?page=viewadvisory&vuln_id=43158 ONLY AVAILABLE WITH SECUNIA CSI AND SECUNIA PSI: * AUTOMATED SCANNING http://secunia.com/vulnerability_scanning/personal/ http://secunia.com/vulnerability_scanning/corporate/wsus_sccm_3rd_third_party_patching/ DESCRIPTION: A security issue has been reported in multiple TANDBERG products, which can be exploited by malicious people to compromise a vulnerable system. PROVIDED AND/OR DISCOVERED BY: Reported by xorcist in an article of the 2600 magazine (volume 27, #3). ORIGINAL ADVISORY: Cisco: http://www.cisco.com/warp/public/707/cisco-sa-20110202-tandberg.shtml OTHER REFERENCES: Further details available in Customer Area: http://secunia.com/products/corporate/EVM/ DEEP LINKS: Further details available in Customer Area: http://secunia.com/products/corporate/EVM/ EXTENDED DESCRIPTION: Further details available in Customer Area: http://secunia.com/products/corporate/EVM/ EXTENDED SOLUTION: Further details available in Customer Area: http://secunia.com/products/corporate/EVM/ EXPLOIT: Further details available in Customer Area: http://secunia.com/products/corporate/EVM/ ---------------------------------------------------------------------- About: This Advisory was delivered by Secunia as a free service to help private users keeping their systems up to date against the latest vulnerabilities. Subscribe: http://secunia.com/advisories/secunia_security_advisories/ Definitions: (Criticality, Where etc.) http://secunia.com/advisories/about_secunia_advisories/ Please Note: Secunia recommends that you verify all advisories you receive by clicking the link. Secunia NEVER sends attached files with advisories. Secunia does not advise people to install third party patches, only use those supplied by the vendor. An attacker could use this account in order to modify the application configuration or operating system settings. Resolving this default password issue does not require a software upgrade and can be changed or disabled by a configuration command for all affected customers. The workaround detailed in this document demonstrates how to disable the root account or change the password. This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20110202-tandberg.shtml. Details ======= Tandberg devices are part of the Cisco TelePresence Systems that provide Cisco TelePresence endpoints for immersive environments, conference rooms, individual desktops and home offices. These devices contain a root user that is enabled for advanced debugging that is unnecessary during normal operations. The root account is not the same as the admin and user accounts. The default configuration prior to TC 4.0.0 does not set a password for the root user. When a device is upgraded to TC 4.0.0, the root user is disabled. This vulnerability has been assigned the CVE ID CVE-2011-0354. Vulnerability Scoring Details ============================= Cisco has provided scores for the vulnerabilities in this advisory based on the Common Vulnerability Scoring System (CVSS). The CVSS scoring in this Security Advisory is done in accordance with CVSS version 2.0. CVSS is a standards-based scoring method that conveys vulnerability severity and helps determine urgency and priority of response. Cisco has provided a base and temporal score. Customers can then compute environmental scores to assist in determining the impact of the vulnerability in individual networks. Cisco has provided an FAQ to answer additional questions regarding CVSS at: http://www.cisco.com/web/about/security/intelligence/cvss-qandas.html Cisco has also provided a CVSS calculator to help compute the environmental impact for individual networks at: http://intellishield.cisco.com/security/alertmanager/cvss * Root account enabled by default with no password CVSS Base Score - 10 Access Vector - Network Access Complexity - Low Authentication - None Confidentiality Impact - Complete Integrity Impact - Complete Availability Impact - Complete CVSS Temporal Score - 8.3 Exploitability - Functional Remediation Level - Official-Fix Report Confidence - Confirmed Impact ====== Successful exploitation of the vulnerability may allow an unauthorized user to modify the application configuration and the operating system settings or gain complete administrative control of the device. Software Versions and Fixes =========================== When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution. In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider for assistance. Workarounds =========== The root user is disabled in the default configuration starting in the TC4.0.0 software version. To disable the root account, an administrator should log in to the applications programmer interface and use the command "systemtools rootsettings off" to temporarily disable the account, or the command "systemtools rootsettings never" to permanently disable the root user. The root user is enabled for advanced debugging. If the root user is needed, the password should be configured when the account is enabled. This can be done through the command "systemtools rootsettings on [password]". To disable the root account, an administrator should log in to the applications programmer interface and use the command "systemtools rootsettings off" to temporarily disable the account, or the command "systemtools rootsettings never" to permanently disable the root user. The root user is enabled for advanced debugging. If the root user is needed, the password should be configured when the account is enabled. This can be done through the command "systemtools rootsettings on [password]". The default configuration of devices running TC4.0.0 does not contain a password for the administrator account. The password for the administrator account should be set with the command "xCommand SystemUnit AdminPassword Set Password: [password]. The password for the root account is the same as the administrator password. The administrator password is set with the command "xCommand SystemUnit AdminPassword Set Password: [password]". Obtaining Fixed Software ======================== Cisco has released free software updates that address these vulnerabilities. Prior to deploying software, customers should consult their maintenance provider or check the software for feature set compatibility and known issues specific to their environment. Customers may only install and expect support for the feature sets they have purchased. By installing, downloading, accessing or otherwise using such software upgrades, customers agree to be bound by the terms of Cisco's software license terms found at http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html, or as otherwise set forth at Cisco.com Downloads at http://www.cisco.com/public/sw-center/sw-usingswc.shtml Do not contact psirt@cisco.com or security-alert@cisco.com for software upgrades. Customers with Service Contracts +------------------------------- Customers with contracts should obtain upgraded software through their regular update channels. For most customers, this means that upgrades should be obtained through the Software Center on Cisco's worldwide website at http://www.cisco.com. Customers using Third Party Support Organizations +------------------------------------------------ Customers whose Cisco products are provided or maintained through prior or existing agreements with third-party support organizations, such as Cisco Partners, authorized resellers, or service providers should contact that support organization for guidance and assistance with the appropriate course of action in regards to this advisory. The effectiveness of any workaround or fix is dependent on specific customer situations, such as product mix, network topology, traffic behavior, and organizational mission. Due to the variety of affected products and releases, customers should consult with their service provider or support organization to ensure any applied workaround or fix is the most appropriate for use in the intended network before it is deployed. Customers without Service Contracts +---------------------------------- Customers who purchase direct from Cisco but do not hold a Cisco service contract, and customers who purchase through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should acquire upgrades by contacting the Cisco Technical Assistance Center (TAC). TAC contacts are as follows. * +1 800 553 2447 (toll free from within North America) * +1 408 526 7209 (toll call from anywhere in the world) * e-mail: tac@cisco.com Customers should have their product serial number available and be prepared to give the URL of this notice as evidence of entitlement to a free upgrade. Free upgrades for non-contract customers must be requested through the TAC. Refer to http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html for additional TAC contact information, including localized telephone numbers, and instructions and e-mail addresses for use in various languages. Exploitation and Public Announcements ===================================== This vulnerability has been discussed in the article "Hacking and Securing the Tandberg C20" published in Volume 27, Number 3 of the 2600 Magazine. Status of this Notice: FINAL ============================ This information is Cisco Highly Confidential - Do not redistribute. THIS IS A DRAFT VERSION OF A SECURITY NOTICE THAT CONTAINS UNRELEASED INFORMATION ABOUT CISCO PRODUCTS. DISTRIBUTION WITHIN CISCO IS LIMITED TO PERSONNEL WITH A NEED TO KNOW. THIS DRAFT MAY CONTAIN ERRORS OR OMIT IMPORTANT INFORMATION. THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. Distribution ============ This advisory is posted on Cisco's worldwide website at: http://www.cisco.com/warp/public/707/cisco-sa-20110202-tandberg.shtml In addition to worldwide web posting, a text version of this notice is clear-signed with the Cisco PSIRT PGP key and is posted to the following e-mail and Usenet news recipients. * cust-security-announce@cisco.com * first-bulletins@lists.first.org * bugtraq@securityfocus.com * vulnwatch@vulnwatch.org * cisco@spot.colorado.edu * cisco-nsp@puck.nether.net * full-disclosure@lists.grok.org.uk * comp.dcom.sys.cisco@newsgate.cisco.com Future updates of this advisory, if any, will be placed on Cisco's worldwide website, but may or may not be actively announced on mailing lists or newsgroups. Users concerned about this problem are encouraged to check the above URL for any updates. Revision History ================ +---------------------------------------+ | Revision | | Initial | | 1.0 | 2011-Feb-02 | public | | | | release. | +---------------------------------------+ Cisco Security Procedures ========================= Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt. +-------------------------------------------------------------------- All contents are Copyright 2011-2007 Cisco Systems, Inc. All rights reserved. +-------------------------------------------------------------------- Updated: Feb 02, 2011 Document ID: 112247 -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iF4EAREIAAYFAk1JjBQACgkQQXnnBKKRMNDwoAD/drZn3b3jiAKxHxsn8YUdNzOu KgtSit4dAjrrKx41AXkA/29dkXOf0nZu4y00cBHOGhKMkyj5DAZrkT6aqyvgnZmA =4vVm -----END PGP SIGNATURE-----

IOT TAXONOMY

AFFECTED PRODUCTS

CVSS

PROBLEMTYPE DATA

THREAT TYPE

remote

TYPE

trust management

CONFIGURATIONS

EXPLOIT AVAILABILITY

PATCH

EXTERNAL IDS

REFERENCES

CREDITS

2600 Magazine

SOURCES

LAST UPDATE DATE

2025-04-11T23:17:55.846000+00:00

SOURCES UPDATE DATE

SOURCES RELEASE DATE